D-Moll Ligts are on but noones home

PeteIOM

New member
Hey guys and Gals, I'm hoping someone can shed some light on my issue.

I have a D-Moll head.. had it 2 years and never had an issue.

Last night in reho I was playing and switched off the mid cut on the amp and then hit the Store button twice to save to my patch. All of a sudden the sound is gone.

All the lights are on, channels switch ok but there is no sound.

Pulled jack from guitar and no contact sound on end of jack.
Changed cabs and cables and nothing.
Plugged directly into FX return and nothing.
No hum, buzz nothing.
All tubes appear to be lighting up fine.

Is there anything else I can try before packing it up and send away :(
 
So... I was advised to try a new Preamp tube in V1... I did this and it worked! Sounded awesome again... played around for 30 mins sounding awesome.

Flipped the Mid Cut toggle switch off and the sound faded away and now its gone again....aarrrggghhhhhhh

Any idea's... anyone.. please..I'm begging.. I really don't want to drag out the TSL100 back up!
 
PeteIOM":a1fiu6wx said:
So... I was advised to try a new Preamp tube in V1... I did this and it worked! Sounded awesome again... played around for 30 mins sounding awesome.

Flipped the Mid Cut toggle switch off and the sound faded away and now its gone again....aarrrggghhhhhhh

Any idea's... anyone.. please..I'm begging.. I really don't want to drag out the TSL100 back up!

service@diezelamplification.com ;)
 
Back
Top