saxxamafone
Well-known member
hi all,
The preamp section of my VH4 is looped into a switcher so I can switch between using my VH4 or my Axefx as the preamp, both then going into the power section of the VH4.
Using parallel loop on the VH4.
When I mute the signal from passing through the VH4's preamp, the return loop then appears to still be active even though I don't have 'SEND 2' activated.
I then send the signal to my Axefx (as a preamp) and then to the VH4's poweramp.
I thought I would've had to turn on 'SEND 2' but it appears to work without it activated.
It's not causing me any issues, just wondering how this works
The preamp section of my VH4 is looped into a switcher so I can switch between using my VH4 or my Axefx as the preamp, both then going into the power section of the VH4.
Using parallel loop on the VH4.
When I mute the signal from passing through the VH4's preamp, the return loop then appears to still be active even though I don't have 'SEND 2' activated.
I then send the signal to my Axefx (as a preamp) and then to the VH4's poweramp.
I thought I would've had to turn on 'SEND 2' but it appears to work without it activated.
It's not causing me any issues, just wondering how this works