Did the Cameron Mods to my 5150....

Sounds sweet~!!!!!!!
I got a Lee Jackson Ampeg That I bought the mod for and the DVD to do the Heater mods on that Ill pay ya to do for me!!!!!!!
 
psychodave":2142wzgw said:
Here is my clip with the mods....

V5B(middle preamp tube:) add 10pf silver mica cap between pins 7 and 8. This is the main mod!!!
R9: piggyback a resistor on top of the 1 meg resistor. I used a 120k based on feel. You can try out 68k, 100k, 120k, 150k, etc. This tightened up the amp a lot!
C26: cut one leg for less bottom end on the rhythm channel
C15: bypass cap for better "feel"

Does this mod apply to the 2x12 combo as well?
 
psychodave":8k8bqpdu said:
Here is my clip with the mods....

V5B(middle preamp tube:) add 10pf silver mica cap between pins 7 and 8. This is the main mod!!!
R9: piggyback a resistor on top of the 1 meg resistor. I used a 120k based on feel. You can try out 68k, 100k, 120k, 150k, etc. This tightened up the amp a lot!
C26: cut one leg for less bottom end on the rhythm channel
C15: bypass cap for better "feel"



Wow! I like that better than the CCV clips I've heard. :thumbsup:
 
Great clip guys! Someday when I see one of these mythical $400 5150's ( :D ), I'll grab it and do this mod.
 
Not mythicall at all... just scored one for $350 shipped!!! Guy thought it was broke, all it had wrong was a bad power tube.
 
pfapin05":knw1ojog said:
Not mythicall at all... just scored one for $350 shipped!!! Guy thought it was broke, all it had wrong was a bad power tube.
gotta love finds like that :thumbsup:
 
I love me them kinds of finds!!! Gets my pickle in a tickle for sure!
 
Back
Top