Diezel Knobs
- Thread starter kylendm
- Start date
Piero the Guitarero
Member
Piero the Guitarero
Member
idnotbe":2fx2cwpf said:
you see something different?
Ventura
Well-known member
Have you browsed the knobs available from Antique Electronic Supply shop?? They've got a tonne of good stuff there...
https://www.tubesandmore.com/products/knobs
https://www.tubesandmore.com/products/knobs
WizardSouth-JP
Well-known member
https://www.banzaimusic.com/Direct-Pointer-19mm.html
other than the slotted screw these are similar. if you use the shaft of your current knob the brass sleeve comes out and you can simply replace with these.
other than the slotted screw these are similar. if you use the shaft of your current knob the brass sleeve comes out and you can simply replace with these.
Do we know if 19mm is the correct size? I thought the pots were 15mm.
WizardSouth-JP
Well-known member
the knobs i linked fit the Diezel Hagen, assume they're using the same pot/shaft
Thanks! Greatly appreciated.
Reiep
Member
Those are from the company that makes the Diezel knobs: https://fr.farnell.com/en-FR/mentor/352-61/knob-lock-point/dp/1282513
Unfortunately they are very expensive, WizardSouth-JP's alternative sounds pretty good.
Unfortunately they are very expensive, WizardSouth-JP's alternative sounds pretty good.
Right on. Good to have both options. I can't recall working with a collet knob in the past. How do you attach it to a splined shaft? Anything to watch out for?
This feller here went full on with the custom faceplate as well. Not sure I'll go that far with mine but it's pretty sexy IMO.
I've also sourced the proper Selco knobs for my SLO module. Having some trouble getting the order placed but should be worth it.
This feller here went full on with the custom faceplate as well. Not sure I'll go that far with mine but it's pretty sexy IMO.
I've also sourced the proper Selco knobs for my SLO module. Having some trouble getting the order placed but should be worth it.