i got this a few days ago and finally have just tested.
but it is a complicated amp and i need the manual.
can you share the knowledge for making the manual? -> manual completed
<Front>
Master2 : 2nd volume for solo. accessible with the footswitch
Master1 : push = master volume of the front panel channel, pull = MV of back CH
can change the channel with the footswitch
Treble
Middle
Bass
Mid-Sweep : clockwise = narrower the mid-range frequencies
Mid-Sweep Switch : 2-way switch. left = mid range voicing, right = upper mid range voicing
Gain2
switch below Gain2 : 3-way switch. left = the most aggressive & bright, middle = default, right = 2nd aggressvie & bright
Gain1
switch below Gain1 : 3-way switch, same as the switch below Gain2 but different capacitor value
Feel : adjust the feel from tight to spongy, counter-clock = tight, clock-wise = spongy
<Back>
Send
P Return : Parallel
S Return : Series
Gain - clean channel volume, push = fatter/warmer, pull = bright
why push/pull?? is it the clean channel? how to select the clean channel?
Treble
Mid
Bass
Violence : push = off, pull = 4th gain stage engaged, clock-wise = increasing the gain
Presence
Glass : NFB for all frequency, counter-clock = darkest/smoothest tone, clockwise = brighter/aggressive
Depth : NFB for low frequency
Footswitch1 : channel switching
Footswitch2 : MV1 & MV2 select
but it is a complicated amp and i need the manual.
can you share the knowledge for making the manual? -> manual completed
<Front>
Master2 : 2nd volume for solo. accessible with the footswitch
Master1 : push = master volume of the front panel channel, pull = MV of back CH
can change the channel with the footswitch
Treble
Middle
Bass
Mid-Sweep : clockwise = narrower the mid-range frequencies
Mid-Sweep Switch : 2-way switch. left = mid range voicing, right = upper mid range voicing
Gain2
switch below Gain2 : 3-way switch. left = the most aggressive & bright, middle = default, right = 2nd aggressvie & bright
Gain1
switch below Gain1 : 3-way switch, same as the switch below Gain2 but different capacitor value
Feel : adjust the feel from tight to spongy, counter-clock = tight, clock-wise = spongy
<Back>
Send
P Return : Parallel
S Return : Series
Gain - clean channel volume, push = fatter/warmer, pull = bright
why push/pull?? is it the clean channel? how to select the clean channel?
Treble
Mid
Bass
Violence : push = off, pull = 4th gain stage engaged, clock-wise = increasing the gain
Presence
Glass : NFB for all frequency, counter-clock = darkest/smoothest tone, clockwise = brighter/aggressive
Depth : NFB for low frequency
Footswitch1 : channel switching
Footswitch2 : MV1 & MV2 select