gbsmusic
Well-known member
I know this is a stupid question but can some one post a picture of their 4-12 cab wiring. I'm wiring my Bogner 16 ohm cab and I want to do it right. As you can tell this is NOT my thing so thank you for any help.
samtheman
Member
gbsmusic":fqkqo411 said:
Example:
4 X 8 Ohm Speaker = 8 Ohm Load
4 X 16 Ohm Speaker = 16 Ohm Load
Help ?
petejt
Active member
Mine's a bit of a mess at the moment....
All the speakers are 8 ohms. Will be wired in an X-pattern, 16 ohms per side.
All the speakers are 8 ohms. Will be wired in an X-pattern, 16 ohms per side.
hunter
Active member
You could try different versions
Vintage/Marshall (Parallel-Series)
Modern Style (Series-Parallel)
Both switchable (add switch on white cable)
Vintage/Marshall (Parallel-Series)
Modern Style (Series-Parallel)
Both switchable (add switch on white cable)
The Hoff
Active member
I keep this site as a reference: http://www.colomar.com/Shavano/4x12wiring.html
A
Anonymous
Guest
Aiken has a diagram that lets you do both types of hook ups with a switch. Select Advanced technical info and scroll down to the bottom.
http://www.aikenamps.com/
http://www.aikenamps.com/
steve_k
New member
I always wire mine like the top photo, in parallel-series. What's the speaker response and tonal difference in the two?
Steve
Steve
hunter said:You could try different versions
Vintage/Marshall (Parallel-Series)
Modern Style (Series-Parallel)
hunter
Active member
steve_k":3mjoptli said:
Actually I made some clips some time ago in this thread: viewtopic.php?f=3&t=62570&p=715867
gbsmusic
Well-known member
Thanks guys!! 
