Input question

I want to leave my Kemper (line in) and my amp head (speaker in) plugged in to my Live at the same time for convenience. I don't intend to use them at the same time. Is that ok or will problems occur?

If this is ok, how would I toggle between inputs?

-John

Hi John,

when you plug something in the Line input, it disconnects the Speaker input from the speakersim (the load is still attached to your amp).

On the Torpedo Live there is no easy way to have both input connected and switch from one to the other. You have to unplug the 1/4" from the Line input to get the Speaker Input back.

On the VB-101 Torpedo Studio you can select the input from the Torpedo Remote or on the unit itself (selection by relay).

Thanks, Guillaume! Not a big deal to unplug/plug. Just thought I'd ask.

Really love the Live by the way. (As do my family and neighbors, who are grateful for the low volume recording).

Thank you for the kind words, I try to convince the guitarists' wives that a Torpedo Live is the best Valentine's gift.