I'm just trying to make sure I understand the dual processing feature. You're still running up to 2 cabs with only 1 mic each like in the VB-101, only now you can send the cabs to your interface separately, right? Is the eq section within the Torpedo an overall one, or does each cab have its own?
Studio dual processing question
- Thread starter fearhk213
- Start date
guillaume_pille
Active member
Hi fearhk213,
You have 2 separated channels, each one can have one cabinet and one microphone. These are totally independent processing channels, from the miking to the post FX.
In the user's manual you should take a look at the routing diagrams.
1 EQ/comp/exciter per channel. Please note that you can link them, in case you want to process a stereo source and make sure the compressor acts accordingly.
You have 2 separated channels, each one can have one cabinet and one microphone. These are totally independent processing channels, from the miking to the post FX.
In the user's manual you should take a look at the routing diagrams.
1 EQ/comp/exciter per channel. Please note that you can link them, in case you want to process a stereo source and make sure the compressor acts accordingly.