Torpedo live Spdif output frequency

I'm using Torpedo live with elevenrack as a audio interface and protools.
I have a question about spdif frequency.
Shoud I set the spdif frequency the same as the protool session sample rate?
In other words, I only have a choice for protool session sample rate 48k or 96k if I use spdif out of TL?

When I create 44.1k session, Torpedo live's spdif out doesn't work correctly either I choose 48k or 96k in TL setup manager.
Is this Normal?
Thanks

Hello dirtybogner,

the Live SPDIF output frequency is set to 48KH (or 96KHz, depending on the setting in SETUP/SPDIF FREQ).

you audio interface must be in slave mode (in other words, getting its sampling frequency from the Live), your Pro tools project will thus follow the sync and be in 48KHz.

In other words, I only have a choice for protool session sample rate 48k or 96k if I use spdif out of TL?

Click to expand...

That is correct.

Everything is in the manual, p18:

http://www.two-notes.com/downloads/EN_MANUAL_torpedo_Live.pdf

Hello, Guillaume.
Thank you very much for the quick reply as last time!
Now I understood correctly.
Thank you, Fumihiro