Doubt about the origin of the audio from a video.

Hi!
I have seen this video which use a Reload.

https://www.youtube.com/watch?v=JqtcwEYSqeU

I'm not clear as the final audio occurs. How is the Reload involved in the final result?
Can anyone tell me what is the exact string to the audio you hear?

Thank you!

He states his path which is using the Reload as an attenuator. Unlike a traditional attenuator, the Reload loads the amp down to line level and then re-amplifies the signal back to the connected speaker at a continuously adjustable volume without changing the tone. The speaker is then mic'd traditionally to DAW. I hear a bit of clipping at the DAW input at a few places, the Reload does not do this so it's most likely the gain staging of the mic pre or the print to video

It's in the description of the video:

Signal Chain: Gibson ES-335 Dot Reissue - Marshall 2555 - Two Notes Torpedo Reload - Marshall 2551A - EV RE320

Click to expand...

The RE320is a dynamic microphone. http://www.electrovoice.com/re320/RE320

Benjamin uses the Reload's reamping function to show the effect of moving the various parameters of the amp later in the video.

Thanks!