Hello,
I have been playing around with the torpedo reload since two weeks now and it is a tremendous tool.
I have tested successfully the main features for tracking my guitars, DI attenuator and reamping, but I am a bit struggling to get a final set up working as I am looking for.
I explain myself:
Ideally I would like to be able to record a DI track from the Torpedo Reload, while having my amp head working with my cab (miced) so that I can record as well the amped sound fro reference. Final goal is to have A DI track and an amped tracked recorded at the same time. But somehow I cannot achieve to have any sound fed in the amp head/cab... DI signal is fine however. But nothing in amp/cab
In terms of connections:
- My guitar is plugged in the front inst. input of the torpedo
- XLR connects DI from torpedo to my audio interface - monitors and record well in DAW
- AMP out on torpedo goes to input of my amp head
- Speaker out from my amp is in Speaker in on Torpedo
- Speaker out of torpedo goes to my cab
Basically this is the setup shown in the user's manual. Without the load box cable (as I am using my amp and cab I thought it was useless and anyway my audi interface only has two in) and without the reamping cable from audio interface to replay IN of torpedo.
Hence is what I want to acheive possible at all ?
Does it require to have the DAW and computer always on ? If not that would mean lots a cable plugs and unplug when just playing without recording...
Is that achievable with only two xlr inputs on my interface.
I would be so so happy to get some help... It's getting frustrating
Thanks in advance,
N
I have been playing around with the torpedo reload since two weeks now and it is a tremendous tool.
I have tested successfully the main features for tracking my guitars, DI attenuator and reamping, but I am a bit struggling to get a final set up working as I am looking for.
I explain myself:
Ideally I would like to be able to record a DI track from the Torpedo Reload, while having my amp head working with my cab (miced) so that I can record as well the amped sound fro reference. Final goal is to have A DI track and an amped tracked recorded at the same time. But somehow I cannot achieve to have any sound fed in the amp head/cab... DI signal is fine however. But nothing in amp/cab
In terms of connections:
- My guitar is plugged in the front inst. input of the torpedo
- XLR connects DI from torpedo to my audio interface - monitors and record well in DAW
- AMP out on torpedo goes to input of my amp head
- Speaker out from my amp is in Speaker in on Torpedo
- Speaker out of torpedo goes to my cab
Basically this is the setup shown in the user's manual. Without the load box cable (as I am using my amp and cab I thought it was useless and anyway my audi interface only has two in) and without the reamping cable from audio interface to replay IN of torpedo.
Hence is what I want to acheive possible at all ?
Does it require to have the DAW and computer always on ? If not that would mean lots a cable plugs and unplug when just playing without recording...
Is that achievable with only two xlr inputs on my interface.
I would be so so happy to get some help... It's getting frustrating
Thanks in advance,
N