1. Make your connections using the proper cables. An instrument cable plugs into your guitar, the other end plugs into your Peavey Amp. The Speaker Cable plugs into the Speaker Output of your Peavey, and into the Speaker Input (8 Ohms) on the back of the Torpedo Live.
- Yus.
2. Read the manual with your amp. Dial in sounds using the knobs and learn how to use your amp. This is verrry important.
- I will fiddle with knobs! \(^o^)/
3. If you feel pretty good about your amp and have a sound you like, now try different settings on the Torpedo Live. Try different microphones, different cabinets. You should turn the Power Amp simulation off. You don't need it because you are already using your own amplifier. Learning how to use the Torpedo Live is also really important.
- Yeah I noticed getting a sound I like is really damn hard considering I have to limit myself to not go max on gain. ;_;
GO SLOW!
- I shall. I will post tomorrow if I get problems. Oh and thanks for the help!
- Yus.
2. Read the manual with your amp. Dial in sounds using the knobs and learn how to use your amp. This is verrry important.
- I will fiddle with knobs! \(^o^)/
3. If you feel pretty good about your amp and have a sound you like, now try different settings on the Torpedo Live. Try different microphones, different cabinets. You should turn the Power Amp simulation off. You don't need it because you are already using your own amplifier. Learning how to use the Torpedo Live is also really important.
- Yeah I noticed getting a sound I like is really damn hard considering I have to limit myself to not go max on gain. ;_;
GO SLOW!
- I shall. I will post tomorrow if I get problems. Oh and thanks for the help!