tomweishaeupl
New member
Today i could make IRs in our unechoic chamber
I used:
Brüel and Kjaer measurement mic
Sennheiser Evo 900
Shure Sm57
I used also a
Felleretta cab, 1x12 halfopened.
Celestion Seventy80 speaker
I made linearized duplicates, that should traslate very well on all systems due to their more linear frequency response.
I used Blend IR so the resulting file is a .tur so if you have "wall of sound(free)" or other two notes product you should be able to use them.
SO here they are!
https://www.dropbox.com/sh/7q9uyqvzymcm ... suNfa?dl=0
What is linearizing the Cab?
I use Blend IR to make the Sectrum more linear. This means your sound will me more in front of the mix, and will better translate in many different mixes and on different systems.
here is a little before and after
https://soundcloud.com/thomas-weish-upl ... -and-after
I used:
Brüel and Kjaer measurement mic
Sennheiser Evo 900
Shure Sm57
I used also a
Felleretta cab, 1x12 halfopened.
Celestion Seventy80 speaker
I made linearized duplicates, that should traslate very well on all systems due to their more linear frequency response.
I used Blend IR so the resulting file is a .tur so if you have "wall of sound(free)" or other two notes product you should be able to use them.
SO here they are!
https://www.dropbox.com/sh/7q9uyqvzymcm ... suNfa?dl=0
What is linearizing the Cab?
I use Blend IR to make the Sectrum more linear. This means your sound will me more in front of the mix, and will better translate in many different mixes and on different systems.
here is a little before and after
https://soundcloud.com/thomas-weish-upl ... -and-after