pasinbyyou
Member
What's the best cleaner you use for scratch pots on old amps, or new ones?
Scratchy Pots on amplifiers - what do you use?
- Thread starter pasinbyyou
- Start date
goaltender46
New member
I use a brand called Caig De-oxit. It is widely regarded as the best stuff for the pots and input jacks on our gear. You dont want to use stuff from the auto parts store, Its too harsh I found this out the hard way it made the pots in one of my amps feel super loose. The De-Oxit works perfectly. 
Below is a link to where I get it
https://www.amazon.com/CAIG-DeOxit-Clea ... B0002BBV4G
Below is a link to where I get it
https://www.amazon.com/CAIG-DeOxit-Clea ... B0002BBV4G
Wizard of Ozz
Well-known member
Pro Gold contact cleaner followed by compressed air to blow out the excess, then wipe away.
Jack Luminous
Well-known member
goaltender46":12zqbn3h said:I use a brand called Caig De-oxit. It is widely regarded as the best stuff for the pots and input jacks on our gear. You dont want to use stuff from the auto parts store, Its too harsh I found this out the hard way it made the pots in one of my amps feel super loose. The De-Oxit works perfectly.
Below is a link to where I get it
https://www.amazon.com/CAIG-DeOxit-Clea ... B0002BBV4G
Wizard of Ozz":12zqbn3h said:
Yes CAIG ProGold is the best one from my own experience... It also works for switches and console faders...
stratjacket
Well-known member
Cool, timely thread. Ordered some DeOxit off the amazon link. Thanks !!