donniecrump
Member
Volume and gain drop when using volume pedal all the way up.
I am trying to figure out why my Mission VM-1 volume pedal works with my Rockerverb MKIII but not with my Hagen.
When I put the volume pedal after my guitar (see chain below) using my hagen the volume drops, even when the pedal is all the way up, and also my overall gain is cut by about half. If I take the exact same setup and plug it into my Rockerverb MKIII it functions as normal.
If there anything I can try at the amp level to troubleshoot this? I really need to keep the 20' lengths. I move around a lot on stage.
Signal path
Guitar
20' of cable from guitar
Mission volume pedal
Mesa stow away input buffer
Decimator II G-String
Badstone phaser
Hall of fame reverb
Polytune mini
Mesa clearlink send output buffer/line driver
20' of cable to amp
I am trying to figure out why my Mission VM-1 volume pedal works with my Rockerverb MKIII but not with my Hagen.
When I put the volume pedal after my guitar (see chain below) using my hagen the volume drops, even when the pedal is all the way up, and also my overall gain is cut by about half. If I take the exact same setup and plug it into my Rockerverb MKIII it functions as normal.
If there anything I can try at the amp level to troubleshoot this? I really need to keep the 20' lengths. I move around a lot on stage.
Signal path
Guitar
20' of cable from guitar
Mission volume pedal
Mesa stow away input buffer
Decimator II G-String
Badstone phaser
Hall of fame reverb
Polytune mini
Mesa clearlink send output buffer/line driver
20' of cable to amp