Rig-Talk

Guitars, Gear, Tone!
It is currently Tue, Sep 25, 2018 8:57pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat, Sep 15, 2018 10:59pm 
Offline
Plank Cranker Wanker
User avatar

Joined: Thu, Jun 11, 2009 8:45am
Posts: 1356
Can I please get a tube layout for this amp? The loop seems really weak and I would like to change the tube .

Also, How do I get V1 out. Its so far down I can't grip it to pull it out. I started to pull the guard of but I was afraid if I did there might be a nut on the underside that would come off and then I wouldn't be able to put it back on. SEE PIC
Image

_________________
Kiesel cs6 w/floyd
Gibson flying v w/floyd
Gibson Lizzy Hale Explorer w/floyd
Diezel VH2
Tracy amps AC1 50 watter (my brand)
Marshall jcm 800 2204
Marshall full stack 12 x 8


Top
 Profile  
Reply with quote  
PostPosted: Sun, Sep 16, 2018 12:22am 
Offline
Plank Cranker Wanker
User avatar

Joined: Sun, Sep 10, 2017 1:50pm
Posts: 1088
Are you human?: 951
Ummm… not sure. I've heard seen a tube sit so low in it's socket unless it was a really uncommon tube (the 6C10 tube in a Fender Super Champ, for example). Have you pulled the chassis? BTW, I think you're right... there are usually nuts on the bottom of the bolts that attach the tube shields to the chassis. Loose metal parts just do not get along at all with high voltage electronics.

_________________
:rock: :rock: :rock:


Top
 Profile  
Reply with quote  
PostPosted: Sun, Sep 16, 2018 1:12am 
Offline
Diezel Amplification
User avatar

Joined: Sun, Jul 02, 2006 5:43am
Posts: 4760
Are you human?: 951
Just remove the 2 small screws. The loop level is not too weak.
It works also for pedals. The volume knobs should be around
12 o clock to get a proper send level.

Best regards,
Peter


Top
 Profile  
Reply with quote  
PostPosted: Sun, Sep 16, 2018 7:09am 
Offline
Plank Cranker Wanker
User avatar

Joined: Thu, Jun 11, 2009 8:45am
Posts: 1356
I’m not using pedals ,I’m using a fractal FX8. I’ll try adjusting the output on it today.

Is V1 used for both channels?

_________________
Kiesel cs6 w/floyd
Gibson flying v w/floyd
Gibson Lizzy Hale Explorer w/floyd
Diezel VH2
Tracy amps AC1 50 watter (my brand)
Marshall jcm 800 2204
Marshall full stack 12 x 8


Top
 Profile  
Reply with quote  
PostPosted: Sun, Sep 16, 2018 1:51pm 
Offline
Plank Cranker
User avatar

Joined: Thu, Jun 17, 2010 1:32pm
Posts: 982
Are you human?: 951
Peter Diezel wrote:
Just remove the 2 small screws. The loop level is not too weak.
It works also for pedals. The volume knobs should be around
12 o clock to get a proper send level.

Best regards,
Peter


I posted in the other thread wondering about this. Is this a design that would potentially decrease tube vibration/rattle?

_________________
The harsh cold winter gives way to a warm, rainy spring.


Top
 Profile  
Reply with quote  
PostPosted: Sun, Sep 16, 2018 9:17pm 
Offline
Plank Cranker Wanker
User avatar

Joined: Thu, Jun 11, 2009 8:45am
Posts: 1356
I spent the day with the amp and my Fractal FX8 and I retract the "loop seems weak statement" I just had to get the Fractal set up for this amp.

_________________
Kiesel cs6 w/floyd
Gibson flying v w/floyd
Gibson Lizzy Hale Explorer w/floyd
Diezel VH2
Tracy amps AC1 50 watter (my brand)
Marshall jcm 800 2204
Marshall full stack 12 x 8


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group - Terms of Use