Recent content by Lord Nelson

Hi all I did some work on my TOL 100 many years ago and didn't screw the chassis back on to the headshell. Needless to say, the screws are long gone. Did Egnater/Rocktron use a standard format for these screws? I started using it again, and it's a bit impractical to have the amp slide out of...

I was pulling my hair for a while trying to optimize my rig. I wanted to be able to switch the g-major in and out using the switchable loop since it affects my tone even when bypassed (at least to my ears). The decimator prorack had to go in the serial loop. The problem with this setup was that...

:|::QBB: Is there a way around that problem? For example by linking the switchable loop to the serial (or parallell, whatever comes last), and plug the decimator in the loop that comes first in the chain?

What about the parallell-loop? Is that after the switchable loop as well?

Actually, I think it looks pretty cool :iloveyou: It should be a special easter edition

Have you adjusted the input/output on the g-major? Also the presets are programmed with -6db from the factory

Accoring to Adrian Smith and Dave Murray thirds are all you need

If anybody would give me anything, I'd gladly take it, but if I got to choose, Diezel and Hamer. Huber would be nice too

Check out Landola. Great guitar for the money, at least in Europe. Don't know what they go for in the states

Of course my band has twin diezels

80% of the time I'm on ch 2 + gain: 2 bass: 11 - 12 middle: 11 -12 treble : 2 - 3 midcut around noon With these settings I get a good metal rythm sound with my Hamer standard (duncan custom in the bridge) For lead I use more of less the same settings on ch 3 except the midcut and a little...

[/img]