T00DEEPBLUE

Are there any quick connects inside the amp for the switching circuit that might have come loose or the wires within said connector...

OK this is just bullshit. I've just tried this and the MIDI thru port actually works now. ENGL's manual specifies in semi-broken...

Check on the back on the amp, on the small Dip-Switch Panel of 6 small switches. Make sure that Dip-Switch #6 is "On" (pull switch down)...

My guess was that MIDI Thru on Savage is OK. That's why I asked you to do pin shorting test on the MIDI cable. Standard MIDI cables use...

I appreciate you're all trying to help. :giggle: I've just done some testing. Pins 1 and 3 are delivering 3.3v in reference to ground...

I would also like to add: For the sake of being systematic, I've also plugged the MIDI input of the NNB into the MIDI input of the ENGL...

Hi. I'm trying to use a MIDI thru port on the back of my ENGL Savage so I can pass a MIDI message onto my Disaster Area NNB controller...