FS: '93 Mesa Tremoverb Rev D head conversion $1100

cardinal

Well-known member
First version Tremoverb. Rev RR-1D with a serial loop. Was a combo (I think they all were). Now in a Mather headshell.

Looking for $1100 shipped and PayPal'd. Please read: all aspects of the amp function, including the tremolo. The reverb tank is installed, but the reverb is noisy. It's not bad when the volume is loud, but it's bad at low volumes. The power cable has some wear. The headshell is quality built but it's not a factory fit. The knobs are low and close to the edge but they turn freely. The face plate is too short and there's a gap to the chassis. Also, some of the mounting threads on the chassis seem stripped (heavy as hell as was mounted upside down forever in a combo cab), so I have used some longer screws and put a nut over the top to make sure it's not going anywhere.

This is why it's $1550. It's sold as-is but as I said it functions, just noisy reverb and it's in an aftermarket headshell.

Oh and it's upside down in the shell because no Recto head should be mounted tubes down, come on. So yes all the lettering is upside down up.

Happy to answer serious questions.

09-C96068-FE9-F-42-A7-BC3-B-A3977-F310-EC7.jpg

323012E3-BD67-49C3-A494-E66181534749.jpeg

BC712CC0-495E-4083-B6D6-DA47F4735ECC.jpeg

B0A83CF0-5284-4825-A6A4-43202E883365.jpeg

image.jpg
F0E8DC8E-045B-4AA9-9FCD-E0551F40A78E.jpeg

0A69292D-B136-4635-A3D3-EC4BFD6EAACC.jpeg
 

Attachments

  • BC8208D0-C83F-43B8-B770-95FBD5A12A04.jpeg
    BC8208D0-C83F-43B8-B770-95FBD5A12A04.jpeg
    2.8 MB · Views: 80
  • D92A2B63-F568-4F26-9918-5A6EE3910FE4.jpeg
    D92A2B63-F568-4F26-9918-5A6EE3910FE4.jpeg
    4 MB · Views: 80
Last edited:
Have a similar Tremoverb Rev D combo put into a head shell. It absolutely slays on all channels and modes.
Someone should snag this before I decide I should have a backup.
Not many of these around.
 
Back
Top