Slaving with a Suhr RLIR

MrDowntown

Well-known member
Trying to slave using my Suhr RLIR
- EVH Iconic in 10w mode being primary amp.
- Mesa Mini Rec in 10w being secondary.

I consider myself following the Suhr instructions for salving…problem is the secondary amp volume control has no effect on volume.

What am I missing here. This ain’t long division.

Mucho grassy-ass!
 
That's normal when you use a secondary guitar amp's effects loop as the slaved amp, it's better to use a dedicated power amp. As a work around you can put a volume pedal in between the Suhr load box and the secondary amp, instant volume control!
 
My secondary amp for slaving is a Marshall DSL40CR. I plug into the FX loop return & I can adjust the volume with the master volume
& can use the reverb, presence & resonance controls.

I tried that with my friends Fender Hot Rod something and the master volume was before the FX loop so I had no volume control
 
Back
Top