JCM 800 MOAB clip with “pull cut” feature

  • Thread starter Thread starter RedPlated
  • Start date Start date
RedPlated

RedPlated

Well-known member
I’ve been adding this feature for a while but never really recorded it. Pulling the treble control engages “pull cut” which makes the amp a bit lower gain and more classic sounding. I also have the diodes blended out quite a bit here.

 
That’s pretty much the tone I live by on mine. And boosting when needed with an Archon silver is just perfect
 
  • Like
Reactions: PDC
I use this feature a ton on mine - makes the amp so versatile for the more classic sounds. Great clip man captured that very well
 
Dayumm! Is the ‘pull cut’ footswitchable - or could it be? Perfect rhythm / lead option there.

Im betting with pull cut engaged, that amp loves all the different flavors of boost in front.
 
Last edited:
PDC said:
Dayumm! Is the ‘pull cut’ footswitchable - or could it be? Perfect rhythm / lead option there.

Im betting with pull cut engages, that amp loves all the different flavors of boost in front.
Click to expand...
Damn that’s a good idea- need to try that today. I’ve literally never used a boost with mine
 
  • Like
Reactions: PDC
PDC said:
Dayumm! Is the ‘pull cut’ footswitchable - or could it be? Perfect rhythm / lead option there.

Im betting with pull cut engages, that amp loves all the different flavors of boost in front.
Click to expand...
Hmmmm this is a good idea. Never thought of it.
 
  • Like
Reactions: PDC
LPMojoGL said:
That clip sounds really good.
Click to expand...
I wish yours would have had the “pull cut” treble knob. I didn’t start adding that until later. The 6 way gain style and pull cut really add a lot of versatility. Gain style does require drilling out another one of the input holes in the chassis, but it’s worth it.

Ironically that amp was sold to a guy who lives about an hour away from me. He’s bringing it down this week to add those features.
 
RedPlated said:
I wish yours would have had the “pull cut” treble knob. I didn’t start adding that until later. The 6 way gain style and pull cut really add a lot of versatility. Gain style does require drilling out another one of the input holes in the chassis, but it’s worth it.

Ironically that amp was sold to a guy who lives about an hour away from me. He’s bringing it down this week to add those features.
Click to expand...
Is there an easy way to reverse the switch so the pull cut is a pull bright?
 
You must log in or register to reply here.
Back
Top