Search results

Also check the small switch next to the MIDI In on the Savage. The one labeled Engl Midi footcontroler. It should be on the right side unless you use an engl midi switcher.

You can try to change the pickup ring springs. I had an issue with them adding weird noise in the past on one of my guitar. And check the wires from the pickups if they are not too tight and act like a string.

No stress buddy :)

It's 5A slow blow (for USA). The number 3 should be blackened (3A is for Europe - 230V).

It is about the sweetspot for gain. I found that the gain about 6.9-7.3 works best for me for heavy rhythm and 7.5-8.0 max for leads. With or without boost pedal baked in the profile. Any more gain and you will find that the profiles are way overcompressed and will sound the same. Boost pedals...

Orange FS-2 should work too. Or if you want smaller footswitch then Kartakou FS-2 is a good option too (look for it at Reverb). But If you know how to solder then make your own. It is not really that difficult. You just need some enclosure, few wires, 2xTS jack or 1x TRS jack, 2x SPDT latching...

Peter Steele for me. I wish that I could see TON live.

The contour knob on MC2 allows you to adjust the amount of negative feedback in the power amp. On it's lower settings the sound is spongy, smooth and dark and it is going louder, brighter and punchier as you are turning it up. If you want the MC2 to sound closer to the MC1 then leave the knob...

Yep, the new VH4 are shipped with 6L6 now. So your VH4 is from the older supply. Look at the thomann website, all new diezel amps are shipped with 6L6 tubes last few months. But don't be sad. The KT77 are nice tubes. I like them in my Herbert a lot. When I bought my latest VH4 I have changed the...

The 6L6 tubes in Herbert seem legit, they are the new diezel stock tubes (6L6 redbase by TAD). The tubes in VH4 look like KT77 by JJ and the 6L6 letters are probably just a serial number. My KT77 have 16K8 on their backs.

This is strange. Can you provide us some photos of the tubes? I think that the label directly on the glass is the right one. The stock tubes have changed over time. For some years the JJ KT77 were stock poweramp tubes but now they have been swaped for 6L6 due to the JJ tubes shortage.

It's not necessarily a scam. Paypal suspended its services in Russia a few months ago. A lot of companies based in Russia have troubles using PP (or Google or Apple pay) for quite a time now. But to be honest I would not risk using services other than PP or Reverb.

Looks stock to me. My VH4 has a very similar wiring like yours. But you can ask Papa Diezel to be sure. Send him an email to peterdiezel (at) diezelamplification (dot) com

The loss of the lowend and harsh sound could be a symptom of bad or worn powertubes. Check the bias for sure and check the HT fuses and LEDs on the rear panel.

I did the "under the pcb" mod as it is surely better looking and more sturdy than soldering the pads on the jacks. You can see the mod on this page - https://www.thefretboard.co.uk/discussion/111072/jcm2000-dsl50-thinking-of-buying-one-any-advice/p2 (you can also improve the soldering on the...

I have Herbert Mk I and there shoud be way more gain and clarity on the 3rd channel with settings on noon. Swap the preamp tubes one by one.

My slanted Mesa OS with VH4 or Herbi si a killer combination. I'm pretty conservative with the bass settings on the heads and the cab is on wheels but so far no flub unless I crank the bass or depth control.

Sorry about the ENGL tech support. When I had some issues with my E580 (bad optocoupler) they were quite helpful and send me a replacement part. I have only this schematic. Maybe it could help.

Hello :-) I have bought a 2018 VH4 head and have one question about ch3 and ch4. It apperears that on this particular VH4 the difference in gain between these distorted channels is quite small. There is obvious difference in voicing (ch3 is slightly darker and ch4 has slightly more mids) but...

Hi guys, need some help with my Pittbull UL. When it warms up it develops strange popping or ticking sound, not crackling or hum. It's across all channels. Gain and channel volumes, voicing or eq switches, loop on/off don't make a difference. I can hear it with master volume turned off and...