Search results

I have a mint Ceriatone 100W Chupacabra I would like to trade for an older Splawn Quick Rod or Pro Stock. 2009 or older on the Splawn...at the very least its gotta be pre switch to Classic Tone iron. The Chupa has a Nau Engineering FX Loop in replacement of the stock crappy insert. Transparent...

I've had 3 EBMM Axis over the years. Kinda have the itch again. And started looking around a bit. I'm surprised at the lack of used ones on forums, enay, reverb, etc. Also wondering what the quality of newer and current ones is like these days?

I hesitated on the one posted recently and now I'm thinking I really do have a use for a GSP1101 with Control 2 for my practice set up. So I'm looking for the pair. I have a POD HD500 to trade towards it if interested.

HT fuse blew in my Chupacabra. Hoping it was just a valve and if it is I have some spare sets of EL34s to use for the time being. It will likely drive me to pull the trigger on some new tubes though and I have been wanting to try KT77s in my Helios. So I am wondering if I would be able to try...

Never played any EVH before and never tried anything with Kruse Mods. Had a trade opportunity for this amp and thought I would give it a try. I've only had it a week, but I gigged it last night and man this thing really rips. I hung out on the blue almost all night but it was really the first...

Traded amps of equal value with cyndicate. Great communication all the way through and delivered exactly as described. Thanks cyndicate!

2013 LS100 G3 that was updated with Mustard caps, given the Hard/soft toggle, channel toggle on rear, and Rhythm Volume on back. Updates done in the fall of 2017 by Bill. Also includes footswitch + trs cable, soft cover, and power chord. TRADED Landry Ls100 G3 https://imgur.com/a/HxZXd

I would like to hear from anyone that has tried KT77s in their Helios. Good, bad? What does it change?

When I got my Chupa a few weeks back I played it at rehearsal before getting the loop upgraded and didn't love it. Partly because I just didn't have it figured out yet and wasn't dialing it in right and partly because I couldn't put my gate and Para EQ in the loop. Once I got the loop upgraded...

Been a while since I got anything interesting. Traded for a mint Ceriatone Chupacabra 100 (thanks tpruitt!). It's cold as balls out and I'm bored so I'll share some initial thoughts. I have been interested in these for a while and read/listened to everything I could. In my opinion most of...

Super clean Mark IVb with original footswitch. I believe this to be an early build as it has the attached power chord. Would prefer to trade towards one of the following: -Landry LS100 G3 -PWE EH3 -Ceriatone Chupacabra, Yeti or King Kong -Surreal CM100 or Atomica -Henning Bottlerocket...

So a while back I completely messed up the finish on the back of my McCarty. There is a spot abput 3 by 5 inches where the finish got eaten into. PRS quoted 1500 for a total refinish. I can't justify that expense. I don't play the guitar much and I am ima weird spot with it where I can't sell...

Curious what the music scene is like in other towns across the US. I grew up outside of Allentown PA and it didn't seem like there was much of an outlet for live bands. Granted I was never really a part of the local scene and didn't spend much time in the area when I hit 21 and could go to...

I think I could be fine with leaving the EQ and FX loop active all the time and currently I really only need to switch Rhy 2 and Lead. The FU-3 is pretty big so I would like to figure out how I can use those individual jacks on the head to switch just between those channels. How would I do...

I don't like that I have to run the Mark IV on 8ohm into a 16ohm cab. Trying to weigh some options. Thought about a new OT for the amp with a 16ohm tap, but then thought if I am sinking $ into this maybe 8ohm speakers in the Bogner cab is a better long term investment. I like the V30s in it...

So I stuck my Analogman GE-7 in the loop of my Helios and was really liking the low end I could add to it. Problem is, I have been running the Helios with nothing in the loop and just putting a jumper across it so I can toggle the loop on/off for solo boost volume. If I run the EQ in the loop I...

Mint 20th Shiva head with brand new JJ KT88s. Comet tolex, reverb, footswitch included. $old. I will sell outright, but I am open to trades for the following: -Bogner Uberschall -Landry LS100 G3 -Bogner XTC -Mesa JP2C -Mesa Mark III -Henning Bottle Rocket I could entertain others as well. I...

Quick back ground. Recently purchased a 20th Shiva head and tested it out with a Splawn 4x12 for a bit. Never messed with tubes nor played it through my Bogner cab. Pretty quickly decided it was cool but not really for me so I put it in the trade block. Got a local deal for a 101b lined pretty...

Not sure why I never really looked into the Uberschall amps. Guess I had a preconceived notion they are too modern for me. That's pretty dumb though because my feeling is if an amp sounds and feels great and sits in the mix then who the hell in the crowd is measuring modern vs old school tones...

So I just a Bogner 101b. Amp sounds killer, but I am having an issue with the FX loop and footswitch. When I turn the loop to on with the switch on the head, it activates and works fine. That seems to render the Footswitch useless. Stepping on the Loop button doesn't even light up the LED...