Search results

Hello @swampstomper It is not possible to have names longer than 32 caracters in a Two notes hardware unit. This is also true for preset names and DynIR cabinets. Kind regards

@deloosem It rearranges the IRs in the internal memory so that you do not lose available slots to store IRs. It is the same way as defragmentation on a computer.

Hello @deloosem I will pass your suggestion to the R&D team for future products.

Hello @Nathanbar . Everything you need to know about impedance mismatch and Torpedo units is summed up in this article: https://support.two-notes.com/knowledgebase.php?article=321 Reading your message, you need to follow the guidelines and precautions we have given through this article so as...

Hello @Mattik I have seen your other message on this thread ( https://www.rig-talk.com/forum/threads/can-a-torpedo-captor-take-an-overdriven-marshall-super-lead.213913 ) . I assume both messages are linked. Can you please submit a ticket with audio samples on the Two notes helpdesk please?

Hello @Ys1973 Yes, you can use the Captor X for the attenuation needs you have. I use a Hotrod Deluxe with a Captor X. The Blues junior is less powerful than the Hotrod obviously, but my playing level on the Hotrod is the lowest possible, and the attenuator really helps me in pushing the amp a...

Hello @deloosem The speaker output jack is a switch jack and is not designed for a TRS connector. What you imagined to do is impossible, unfortunately .

Hello @Oseidar It is possible to change preset by swiping on the blue screen of the preset window (where the name is shown). If you swipe the name, you will change the preset. I have forwarded your idea to the software team to see if something could be implemented in the future.

Hello @kmanick Your whole setup consists of 8 ohms cabinets and load box. If you use the attenuator or not, your amp will always be seeing an 8 ohms load on the line that includes the Captor X. When you will be using 2 8 Ohms cabinets (with one Captor X with one cab) with your Splawn amp, put...

@toferlewis Thank you for your feedback. There was no more space physically to fit a power switch on the unit with that size of box. We will keep it in mind for future product development.

Hello Mario Which version of the firmware and Torpedo Remote are you using? Can you submit a ticket on the helpdesk of Two notes (support.two-notes.com) with a screenshot of the error message you get on your screen please? Through the helpdesk I can forward it to the software team and have them...

Hello @JC Dawson The Captor 8 does not need to be powered when using the Line (DRY) output. Have you tried powering the Captor 8 and using the DI (XLR) output and connect the Captor to the C.A.B with an XLR to TRS jack cable. As you have tested 2 amps with the same results, something may be...

Hello @shawknv08 You need to connect the output of the amp to the Captor X's input. You will need to disconnect the internal speaker cable to do so, and make the connection from the amp's output to the Captor X with an additional speaker cable. You will connect the internal speaker cable to...

@Bennu For the input, yes, either a TS or a TRS cable works fine. If the last device before the C.A.B M has unbalanced outputs, use a TS cable. If it has balanced outputs, use a TRS cable. It is the same for the outputs. However, in doubt use TRS/balanced cables at the output.

Hello @tonejunkie99 you can leave it on, but for to preserve the unit's lifetime, I recommend you turn it off when you finish playing at the end of the day. Your amp will still be safe if you forget to plug the Captor X back on. The load box does not need to be powered to be active.

Hello @santellavision1 There is no internal way through the screen or Torpedo Remote to choose which input you wish to use. The Line input has priority on the Speaker Input when it is used.

Hello @glitch78 Can you please submit a ticket on Two notes Helpdesk (support.two-notes.com)? Can you please describe your issue as much as possible in the ticket? I will forward it to the technical team.

Yes, you can use BlendIR to create your own IRs. You will load them with IR MANAGER in Torpedo Remote installed on your computer, and your Torpedo C.A.B.M connected via USB to the computer.

Hello @ChrisBond How are the gain setting in your interface? Are you able to monitor that you are not clipping the input of your interface? What is the routing you are using to record through XLR? Stereo or DualMono? Have you panned teh two tracks hard left and hard right in your DAW?

Oh I am sure I can give you more example :D The inspired by Orange cabinets which are called Tanger, as for tangerines... everytime I come across them I first think of the Led Zep song :D