Search results

Hi @Devourly, Ross from Two notes here, thanks for getting in touch. I would love to help you out with this! One of the first things I would say is don't stack Wall of Sound on top of your Torpedo DSP processed signal - you will essentially be stacking processing on top of processing which...

Thanks so much for sharing - sounded fab and we're so pleased to hear you have balanced the tones now! If you have any other questions, we're here to help! :)

Thank you so much! Looking forward to hearing from you soon!

Hi @Rusty VanTulsa Ross from Two notes here. When configuring ReVolt Guitar we worked hard to voice the channels in accordance with our test amps in our Studio, as such there will be some differences. May I suggest you post some Audio here or to our ReVolt Users Facebook Group and we can look...

Great! we are here to help!

Great amp! We have also noticed the same but there is a touch more compression on your power-amp we have found.

Hi @D20. Ross from Two notes here - that is great news! If you have any specific questions, please dont hesitate to let me know!

Great! Thanks so much! Let me know if there is anything else I can help you with today!

Hi Than, Thanks for getting back to me. This does indeed sounds a little extreme although there will be some differences between the two stacks on ReVolt. Could I ask that you contact our support desk and a member of our specialist team can look into this for you. > Support.two-notes.com

Hi @Than , Thanks for getting back to me. What are you using to monitor the ReVolt out of interest? Thanks and I look forward to hearing from you soon.

Good morning @Than Ross from Two notes here. Thanks for getting in touch - I would be happy to trouble shoot any issues you are experiencing with ReVolt Bass. In terms of the channels, and the differences in the EQ circuits between them, it is important to note the stack on Channel 1 is an...

Thanks for getting back to me. In terms of tips and tricks from our side, with our amps in our studio, a common theme was volume not really increasing past ~6 - rather, anything past this point was more power-amp saturation. However, it is vastly different between all amps so our advice is to...

Hi @bmanzer Ross from Two notes here and thanks so much for weighing in! @Leveraged Sellout - you will find that settings between amps will vary due to the manner in which manufacturers engineer, configure and specify their power amp sections. What amp are you using? Maybe we can advise on...

Hi @Hawkace Great stuff! You should be fine as the Speaker out on the C.A.B. M+ is simply a through. Please let me know if there is anything further I can help you with today!

Hi @Hawkace, Thank you for confirming. May I confirm you have used the attenutor without the C.A.B. M+, between your amp and cab, without issue thus far? Thanks!

Good morning Hawkace, Thanks for getting in touch, Ross from Two notes here. Providing you have a load (your cabinet) connected at all times, this should be fine. So we can sanity check this internally, are you able to let us know what Amp you are using please? Thanks so much! Kind regards...

Hi @WizardSouth-JP Thanks for weighing in! Our load-boxes are tried as tested for sure but we agree, Wizard amps tend to be super loud so you don't need to push them too much, especially in load-box configurations! Kind regards, Ross

No problem at all! :)

Thanks for getting back to me. Please contact our Support Desk and send over your proof of purchase and we will certainly see what we can do! > https://support.two-notes.com/ As ever, if there is anything else I can help you with, don't hesitate to let me know!

No problem at all - we are happy to help! If there is anything further I can assist with, please dont hesitate to reach out!