Search results

Thanks for getting back to me. Yes, that can certainly work, I would just advise turning off the Cab emulation in the Torpedo Device - if you leave it on, you will stack a cab emulation on a real world guitar speaker and the results wont be optimal. For best results, I would recommend either...

Thanks for getting back to me. Please note that C.A.B. M+ does not feature a built in poweramp and as such you wont be able to plug this in as a source for your combo amp's speaker. However, you could look at securing an active FRFR cabinet which can take the XLR or Line out feed without issue...

Ross from Two notes here. Thanks for getting in touch. Regarding Setup Scenarios 1 and 2, no issue here whatsoever. For setup Scenario 3, to connect C.A.B. M+ between an amp and speaker, you will want to connect your Amp Head using a Speaker Cable to the AMP IN connector; then connect your...

No problem at all - Always happy to help!

Thanks for getting in touch. You should be ok here however we would suggest looking at our guide below in terms of what to look out for with an impedance mismatch. Let me know if this helps and if you need anything else, I am here to assist...

Good morning @RigRookie , no problem - yes looking at the issue, it requires a motherboard replacement which is quite a costly repair. Nonetheless, if you need anything else, please do not hesitate to let me know.

No problemo! Always happy to help!

Great stuff! Thanks for letting me know - I have let our support team know now and if you need anything else, please do not hesitate to reach out.

Thanks for getting in touch. There are no upgrade paths from a C.A.B. M/M+ to our latest iteration in the series - namely OPUS. However, we do have a repair facility located in France. If you raise a ticket at Support.Two-notes.com, a member of our team can advise on the estimate for this repair...

Thanks for getting back to me. I am so pleased to hear you are up and running now! As our products tend to exist predominantly in the professional space, there are not as plug-and-play as you may like; this is simply due to the options available in the DSP to fine tune your tone - with that...

Thanks for getting in touch. There are quite a few units out there at the moment so we're sure you will get the comparison you want in the coming weeks. In addition, the product will be shipping early April so if you get a chance to demo one, I cant recommend it enough!

Hi Everyone, Following on from my post above, since launching Reload II we have been asked a lot of questions concerning the new––and improved––Celestion Approved Load Response, including multiple requests for the impedance curves for our latest flagship attenuator / amplifier. In developing...

Hi Everyone, Following on from my post above, since launching Reload II we have been asked a lot of questions concerning the new––and improved––Celestion Approved Load Response, including multiple requests for the impedance curves for our latest flagship attenuator / amplifier. In developing...

Thanks for reaching out and a valid question indeed. We are not planning on doing this as it can be quite subjective dependent on a number of factors, however we will be publishing the impedance curves at the various Ω settings tomorrow - I will be posting them here for sure! Whereas Captor X...

Thanks for getting back to me. No problem at all, please see answers below. 1. It's a stereo amp. What kind of poweramps are in it, Class AB or Class D? It is a class D Power Amp but a very premium one at that - we actually talk about this in our recent live stream here: 2. Considering it...

Thanks for getting back to me. Great questions! As noted above, there is just one Amp input but the unit can be configured to process this across both channels for a Stereo Rig. You should notice a difference in the load response compared to the Suhr solution and it is definitely worth giving...

Thanks for getting back to me. No, there is only 1 amp input and 2 line inputs. From our side, Reload II falls in our all analog line of solutions (like the analog Captor, ReVolt Series and Reload II's Predecessor Reload); first and foremost we see Reload as an attenuator, reactive loadbox and...

Ha! Well you're uncle must be a very handsome guy! Kidding! Super pleased to hear you are stoked about getting a unit - I am watching our inbound daily so I can get you one as soon as they land!

Hi Guys, Hope you're all good! Just thought I would jump in to say we have released our Reload II Feature Run-Down video here... If you have any questions let me know - always happy to weigh in and help! In addition, those of you that have been requesting the ICs will be happy to hear that...

Hi Guys, Hope you're all good! Just thought I would jump in to say we have released our Reload II Feature Run-Down video here... If you have any questions let me know - always happy to weigh in and help! In addition, for any of you looking for Reload II's ICs, you will be happy to hear...