Search results

Hey @manticora Thanks for getting in touch and a great question. Ross from Two notes here. First up, remember that Captor X is not only simulating a cabinet, it is simulating a microphone / preamps / EQs and post processing like the Enhancer and Twin Tracker. As such a fairer comparison would...

Hey @Junk Yard Dog Great stuff! Let us know how you get on! :)

Good morning @Junk Yard Dog Thanks for getting in touch - Ross from Two notes here. The 32 cabinets that are included on Captor X are indeed DynIRs as you have 8 mics with each cab that you can select from to mic-up your cabinet with a pair of mics (front and back) within the designated...

Hey @Junk Yard Dog No problem at all - I am happy to help! In the instance where you only need to send one output to FoH, I would suggest sending the left output only and you should be set! The right output is heavily effected by the Twin Tracker if engaged and may result in a poor response...

Hi @Junk Yard Dog Thank you for getting back to me. Please see answers to your questions below. EV ZLX 12" You most certainly can take one of the XLR outputs and connect it to the input of this PA speaker. I would suggest taking the left output. DynIRs In terms of the DynIRs included...

Hey @Junk Yard Dog Thanks for getting back to me and no worries at all - I am happy to help! You can certainly do this without monitors using the Captor X - however, you wouldn't need to monitor via your laptop - instead you can monitor via the headphone output on the Captor X! The software...

Good morning @Junk Yard Dog Ross from Two notes here. Thanks for getting in touch. Both options will certainly work! The C.A.B. M+ can be placed in-between your Amplifier and Cabinet following the connectivity outlined in the link below...

Good morning @ChuggNorris Thanks for reaching out - Ross from Two notes here. Are you able to confirm your signal chain and I will gladly look into this for you! Thanks so much!

Hi @LeonG Thanks for getting back to me. Understood - however I am sure a Captor X would actually let you record your Tone King amp direct to your interface. If you need any advice relating to this, please let me know!

Hi @LeonG Thanks for getting back to me. Well, it sounds like you need a Captor or a Captor X - these both feature a line out and mean you can simply connect your Tone King Amp to a Captor and then send a line out to your interface or mixer. Does this answer your question?

Hi @LeonG Thanks for getting in touch - Ross from Two notes here! This is possible, however you will need to keep the output of the Captor quite low. With this being said, i would not advise this as you will essentially be stacking poweramps which will adjust the tone of your Tone King...

Hi @AnyNameYouWish Thanks for getting in touch. Ross from Two notes here. Yes indeed, there is now capacity for 64 DynIRs on OPUS! Let me know if there is anything else I can help you with today.

Hi @jojo66 Thanks for getting back to me. In a traditonal setup / studio rig, you would tend to place spacial FX (Reverb/Delay) after your microphone chain, and tone shaping tools (drive / fuzz / distortion) before your preamp. That is why we suggest placing our FX in the manner in which we...

Good morning @natederbs Thanks for getting back to me and I am so pleased to hear you are up and running again! As ever, if there is anything you need, I am here to help! Kind regards, Ross

Good morning @j79 Thanks for bearing with me while I looked into this for you. Our team have confirmed this is a known issue and we have a fix already implemented that will be included in our next GENOME release this month. Please let me know if there is anything further I can help you with.

No problem at all @jojo66! Always happy to help!

Good morning @j79 Thanks for getting in touch, Ross from Two notes here. I have just tested on my side, but I have sent this to our development team for review now - thank you so much for letting us know.

Good morning Ole, Ross from Two notes here - thanks for getting in touch. This is based on a Mesa MKII. Let me know if you have any other questions - i'm always happy to help!

Good evening @jojo66 Thanks for getting back to me. I have previously used the HeadRush FRFR112 to great effect! Let me know if there is anything else I can help you with. Kind regards, Ross

Good evening @jojo66 Thanks for getting in touch. Ross from Two notes here. Great question and I am pleased to hear you are enjoying your experience with OPUS. In terms of a monitoring solution, our suggestion would be an FRFR speaker as you will still be able to use your DynIRs with minimal...