Search results

Good ideas... actually my standard controller is the Egnater 6-button footswitch, so there's not much I could do to screw up the programming with it. But just to be sure I fired up my older-than-dirt Rocktron Midimate and it exhibited the same behaviors. Email sent to Ian! --B

Interesting... I tried the "reset" trick... got the MIDI controller to work when the 3rd module is installed, though I can still only access 1A-3A (not 3B) when using either the MIDI footswitch or channel select button. It's like 3B no longer exists. (And I did try alternate modules in bay 3...

Thanks... so that explains part of the issue (why it never finds the 3rd module after being powered up with only two). Still doesn't explain why it never sees 3B or why the footswitch doesn't work when it's powered up with the 3rd module installed. --B

While setting up for band practice tonight, I noticed the channel switching on my MOD100 was out of whack. First, the amp stopped responding to the MIDI footswitch. I tried an alternate controller & MIDI cable with no success. Then when using the channel select button on the front of the amp...

Anybody here using TungSol 5881's in a MOD100? Was wondering if they were considered "safe", since there's a disclaimer on the Tube Store's site saying that they shouldn't be used in amps with a plate voltage greater than 400v. Not knowing what the MOD100's plate voltage is, didn't know if I'd...

I guess the subject line says it all... how different are the Egnater MHG and EG5 modules? Or put another way, if already own one, is it worth picking up the other? --B

Just curious, if anybody here's owned the older Egnater JTM module as well as the B'Man module, how do the two compare? I saw a JTM for sale and thought about picking it up, then started second-guessing myself that it may be 95% the same as the B'Man (I mean, historically, wasn't a JTM45...

Quick question... does anybody know the supplier for the checkerboard grille cloth on the black & tan Egnaters (e.g., MOD100)? Would like to replace the grille cloth on my current cab (Randall R212C) to match. Thanks! --B

THANKS!!! --B

Quick question for some of the local Egnater junkies... I built one of the amp seminar heads a few years ago and need to replace the power tubes. Anybody know what the plate voltage for the hot-rodded JTM45 is? Thanks, --B

Ok, nobody wants to weigh in? Then I'll just buy Tommy's Rebel and decide for myself... do a little head-to-head (so to speak) comparison, maybe record some demo clips. :) --B

I'm not seeing the deal on the web, and the "MFBF" coupon code doesn't work... is there an alternative code I should be using? Maybe today's the day to pull the trigger on a Rebel. :) --B

Simple question, maybe... :) I've still got my original seminar head (which has served me incredibly well in the studio during the past month) and have been looking for another relatively simple amp to use in the studio that would contrast nicely with the JTM45. So obviously, the Rebel was one...

What are the specs on the 2x12's? open or closed back? V30's or Elite80's? Just as important, perhaps... what's GC selling 'em for? --B

I ran 6L6's and later a mixed quad of EL34's/6L6's in my Vendetta for a while, though honestly, can't remember it making much of a difference. I'm getting old, though, so my sonic memory is fading. Heck, I can't even remember what tubes were in my Vendetta when I took it into the studio...

Here's what I've got right now... - an Egnater M4 rack setup with Digitech GSP1101, VHT 2/50/2, and two 4x12 cabs - Randall RM50 and RM100 combos - Egnater JTM45 head - (9) modules Here's what I've got going in the musical world right now... - a rock band that isn't gigging, is struggling to...

Yeah, in retrospect, I've got a decent means of capturing direct guitar tones... just not a good means of converting the line-level signals out of the DAW back to instrument level/impedance. I'll have to check out that radial box. --B

I'd be game to participate... I've got an M4 with 9 modules, a VHT 2/50/2, an amp seminar head, a couple Randall cabs (V30's & T75's), and lotsa mics. Now I just need a direct box that isn't a total POS. :p --B

Eh, no biggie actually (even though I'm a bit emotionally attached to the Palomino finish)... I ended up getting a hella good deal on an RM100 (and am on the wait list for the dual channel upgrade), so decided to let go of the RM50. So I've still got the M4, JTM45 head, a couple...

Nothing to add, but I will say this is really helpful as someone who has been debating sending in his MHG to get modded into an EG5. (I'll admit, I love the MHG alone, but it completely disappears at band practice.) --B