Search results

I have a Marshall 1960A and want to use two "stereo input jacks" for a dual mono cab set up. Please help me figure out how to wire it up. I want to run four 8 ohm speakers (8+8=16) (8+8=16) in two sets of 16 ohms. I'm using a stereo amp and want to run it at 8 ohms total. Below is the plate...

Thank you for the reply sysexguy. The One Control Chamaeleo is the next step up from the One Control Iguana Tail, in terms of price and I'm short right now. You assumed correctly, as that's what I was looking for. I thought I saw some one using the Iguana Tail but they were using Chamaeleo. <-I...

Thanks for the input Andy. I bought a One Control Iguana II thinking it would work but the switches are on/off not monetary. Fail me. :\ I guess I'll be getting the One Control White Loop. For a temporary solution (over the weekend) can I still use the JX-2 with out harming my Torpedo Live?

Thank you guillaume_pille and Basstyra. @guillaume_pille, it's understandable gibberish. :D Ok, now here's another question. Can I use 1 X TRS 1/4" -> 2 X TS 1/4 (polarity can be inverted on one with a switch on a/b/y pedal I'll be using) into the input of my Torpedo Live? I have an A/B/Y...

Thank you for the answer guillaume_pille! I already have a Y cable ready to go. I wanted to verify. That's what I was thinking about the FX unit.

Tom made some killer amps. He made the first 60 watt Omnitone for me.

I re-worded my post because I have donkey brains and I feel how I ask below is more cohesive. I'll be getting a 2 channel Power amp (pa power amp) and a 2 channel eq, that will power 2 passive speakers. I would like to connect my Torpedo Live to both channels of the eq. How would I do that...

These are the power amp eq that I plan on buying.

I'll be getting a 2 channel Power amp (pa power amp) and a dbx 231s 2 channel eq. My question, how would I go about connecting my Torpedo Live to both channels of the eq? Split (L&R) the balanced line output(TRS)? Line output (Ch1) & and Headphone output (Ch2)? I'll be powering 2 passive...

+1 Another vote for hi-pass and low-pass filters to the eq-section of Torpedo Live

upward

Wait, which setting? 6L6 or EL34?

Thank you good sir!

I need to retube my Dual Rectifier Tremoverb 2x12 and was thinking of getting two KT88's and two KT66's (maybe four KT66's?) Any clips, experience, complaints? I want somore mids and highs from my TOV. I'd been using Ruby EL34's but felt they took away from the bottom end. <-different bottom...

Hasn't been gigged with since it first happened.

I've tested a set of EL34's which produced the same results. Very good point either way.

Back story: I've had my Mesa 2x12 TOV for a few years. I mostly used it at bed room level, then my band started playing shows. Meaning I started using it at band volume a few times a week. We'd have one gig a week for 30 minutes, and all the venues were smoke free. When it happened: Then at...

Thank you for the reply Basstyra, but it seems that another problem has popped up. None of Level indicators are working (hardware or software): https://www.facebook.com/photo.php?v=10 ... =3&theater I'm going to try to return this unit and get another, in hopes I don't have the same problem.

In Remote, yes, edit mode, no. Thank you for your reply.

https://www.facebook.com/photo.php?v=10 ... =3&theater