mrmega
Active member
Ampeg VT-120 head with Ampeg footswitch for sale in excellent condition.
$500
I would rate it at a 9/10. It was just serviced by local amp legend Jim Walton. If you have been in the area for a while, you probably know of him. It has less than 10 minutes playing time since it was serviced.
This is a very rare amp that was released in the late 80s.
* I have owned this amp for about 17 years.
* Never gigged it.
* Studio kept. Non-smoking, Pet free environment.
This is a 120 watt, 3 channel monster. This is a KILLER amp, especially for the money. You can get everything from pristine cleans to a slight overdrive, full blown crunch and massive hard rock tones. It takes pedals well and is packed full of features like presence, reverb, pentane/triode mode, ½ power switch almost every kind of speaker output you can imagine. Full Specs are included below.
I am just outside of Philadelphia and would prefer to deal with someone semi-local. You are welcome to come pick it up or I am willing to drive an hour or so to meet.
I accept Cash & Paypal F&F at time of pickup.
---------------------------------------------
---------------------------------------------
I would consider trades for the following (plus or minus cash depending)
1) Marshall Vintage Modern 2266 50-Watt head.
2) Marshall Vintage Modern 2266C 50-Watt combo.
3) Marshall Vintage Modern 425B Straight cab.
4) Charvel Model 6 with a Kahler
5) 80's Jackson with a Kahler or Floyd Rose
6) Jackson with 3 toggle switches for pickup selection.
7) EVH 5150 Cab that matches the EL34 head
8) Gigrig G3
9) High End 7 String Electric
10) Marshall 4x12 Road Case
11) EVH 4x12 Road Case
12) EVH 100-Watt Head Road Case
13) 1964 or 1965 Gibson Melody Maker (prefer one that needs work as I will be heavily customizing it)
14) Marshall Mode Four Straight Cab
---------------------------------------------
---------------------------------------------
Here are the Specs
3 Channels
Channel A: High Gain
Controls: Gain – High (Pull Low Boost) – Ultra Mid- Level
Channel B: Clean to Medium Overdrive
Controls – Gain – Level – Shared Tone Controls with Channel C
Channel C: Clean to Heavy Crunch
Controls – Gain – Low – Mid – High (Pull Bright) Level – Shared Tone Controls with Channel B
Reverb (with Pull bright switch)
---------------------------------------------
Rear Panel Controls
Effects Loop
*** Line In
*** Line Out
*** Presence
High/Low Damping Switch
*** Triode/Pentode Switch (Full power or 1/3 Power)
*** Power Selector - 60 watts or 120 Watts
*** 5 Speaker Outputs with the following configurations
1x16 ohm
2x16 ohm
1x8 ohm
2x 8 ohm
1x4 ohm
*** Footswitch
Reverb on/off
Channel Select
Ampeg footswitch included (that was specifically for this amp). I have never used it, so I don’t know what functions it does or does not do.
I have a very nice amp cover available for an extra $40
$500
I would rate it at a 9/10. It was just serviced by local amp legend Jim Walton. If you have been in the area for a while, you probably know of him. It has less than 10 minutes playing time since it was serviced.
This is a very rare amp that was released in the late 80s.
* I have owned this amp for about 17 years.
* Never gigged it.
* Studio kept. Non-smoking, Pet free environment.
This is a 120 watt, 3 channel monster. This is a KILLER amp, especially for the money. You can get everything from pristine cleans to a slight overdrive, full blown crunch and massive hard rock tones. It takes pedals well and is packed full of features like presence, reverb, pentane/triode mode, ½ power switch almost every kind of speaker output you can imagine. Full Specs are included below.
I am just outside of Philadelphia and would prefer to deal with someone semi-local. You are welcome to come pick it up or I am willing to drive an hour or so to meet.
I accept Cash & Paypal F&F at time of pickup.
---------------------------------------------
---------------------------------------------
I would consider trades for the following (plus or minus cash depending)
1) Marshall Vintage Modern 2266 50-Watt head.
2) Marshall Vintage Modern 2266C 50-Watt combo.
3) Marshall Vintage Modern 425B Straight cab.
4) Charvel Model 6 with a Kahler
5) 80's Jackson with a Kahler or Floyd Rose
6) Jackson with 3 toggle switches for pickup selection.
7) EVH 5150 Cab that matches the EL34 head
8) Gigrig G3
9) High End 7 String Electric
10) Marshall 4x12 Road Case
11) EVH 4x12 Road Case
12) EVH 100-Watt Head Road Case
13) 1964 or 1965 Gibson Melody Maker (prefer one that needs work as I will be heavily customizing it)
14) Marshall Mode Four Straight Cab
---------------------------------------------
---------------------------------------------
Here are the Specs
3 Channels
Channel A: High Gain
Controls: Gain – High (Pull Low Boost) – Ultra Mid- Level
Channel B: Clean to Medium Overdrive
Controls – Gain – Level – Shared Tone Controls with Channel C
Channel C: Clean to Heavy Crunch
Controls – Gain – Low – Mid – High (Pull Bright) Level – Shared Tone Controls with Channel B
Reverb (with Pull bright switch)
---------------------------------------------
Rear Panel Controls
Effects Loop
*** Line In
*** Line Out
*** Presence
High/Low Damping Switch
*** Triode/Pentode Switch (Full power or 1/3 Power)
*** Power Selector - 60 watts or 120 Watts
*** 5 Speaker Outputs with the following configurations
1x16 ohm
2x16 ohm
1x8 ohm
2x 8 ohm
1x4 ohm
*** Footswitch
Reverb on/off
Channel Select
Ampeg footswitch included (that was specifically for this amp). I have never used it, so I don’t know what functions it does or does not do.
I have a very nice amp cover available for an extra $40
Attachments
Last edited:
