Bad volume pot or something else (guitar wiring question)?

  • Thread starter Thread starter Laura
  • Start date Start date
Laura

Laura

New member
I just got the black Charvel body painted. I assembled and wired both of these. I wired them exactly the same and both have a BG Hellabucker. They both sound great. HOWEVER, I can't get the volume to roll completely off with the volume knob on the black guitar. Bad pot, damaged pot (too much solder) or is there something else I should check before I buy another pot and rewire the guitar again? Any help would be appreciated.

IMG_1149.jpg
 
Check grounds and whether you have connected the correct lugs on the pot.
 
Pot wiper not closing all the way. If there is no hum, then there isn't a ground problem. Looking down at the pot from the cavity, you should have the hot wire of the PU soldered to the left terminal. Middle terminal to the output jack tip, and right grounded to the pot. This is with the lugs facing the output jack. Or, you dropped a big blob of solder in the pot or maybe a bean fell out of your burrito :D . Grab another $10 pot and slap in it.

Steve
 
steve_k":srw6v5u4 said:
Pot wiper not closing all the way. If there is no hum, then there isn't a ground problem. Looking down at the pot from the cavity, you should have the hot wire of the PU soldered to the left terminal. Middle terminal to the output jack tip, and right grounded to the pot. This is with the lugs facing the output jack. Or, you dropped a big blob of solder in the pot or maybe a bean fell out of your burrito :D . Grab another $10 pot and slap in it.

Steve
I am pretty sure that you are right. I checked and rechecked the wiring and it is fine. I wish I lived closer to civilization cuz there is nowhere close to get a new pot. :cry:
 
I suggest ordering a bourns pot from luxxtone, they are awesome
 
steve@russo":3a25krpt said:
I suggest ordering a bourns pot from luxxtone, they are awesome

I just put one in my Suhr from Luxxtone. It is the first pot I've ever owned that zero means ZERO!!!
Smooth and fast as well...very fast.


Mark
 
steve@russo":3h16k420 said:
I suggest ordering a bourns pot from luxxtone, they are awesome
Wade at MCP told me great things about those. :confused:

I wish I would have ordered some pickups from Luxxtone last year. Made the mistake of going elsewhere for some BK's because the other guy supposedly would get them faster and it turned into a nightmare. I still feel like a douche for not ordering from Jerry because he was helpful (so was the other guy until he got my money...).
 
Laura":238xn4vj said:
steve@russo":238xn4vj said:
I suggest ordering a bourns pot from luxxtone, they are awesome
Wade at MCP told me great things about those. :confused:

I wish I would have ordered some pickups from Luxxtone last year. Made the mistake of going elsewhere for some BK's because the other guy supposedly would get them faster and it turned into a nightmare. I still feel like a douche for not ordering from Jerry because he was helpful (so was the other guy until he got my money...).

Somebody send Laura a 250K pot. If I was closer, I would do it myself. Got 12 Bourn's pots from Jerry to redo my LP's.

Oh Jerry.........


Steve
 
steve_k":xzutpg9a said:
Laura":xzutpg9a said:
steve@russo":xzutpg9a said:
I suggest ordering a bourns pot from luxxtone, they are awesome
Wade at MCP told me great things about those. :confused:

I wish I would have ordered some pickups from Luxxtone last year. Made the mistake of going elsewhere for some BK's because the other guy supposedly would get them faster and it turned into a nightmare. I still feel like a douche for not ordering from Jerry because he was helpful (so was the other guy until he got my money...).

Somebody send Laura a 250K pot. If I was closer, I would do it myself. Got 12 Bourn's pots from Jerry to redo my LP's.

Oh Jerry.........


Steve
I thought I wanted a 500K pot... Why 250K? Now I am confused. :confused:
 
Laura":2bqq4f73 said:
steve_k":2bqq4f73 said:
Laura":2bqq4f73 said:
steve@russo":2bqq4f73 said:
I suggest ordering a bourns pot from luxxtone, they are awesome
Wade at MCP told me great things about those. :confused:

I wish I would have ordered some pickups from Luxxtone last year. Made the mistake of going elsewhere for some BK's because the other guy supposedly would get them faster and it turned into a nightmare. I still feel like a douche for not ordering from Jerry because he was helpful (so was the other guy until he got my money...).

Somebody send Laura a 250K pot. If I was closer, I would do it myself. Got 12 Bourn's pots from Jerry to redo my LP's.

Oh Jerry.........


Steve
I thought I wanted a 500K pot... Why 250K? Now I am confused. :confused:

I'm using 500k's :)

Mark
 
I think I've got a couple in my parts box, I'll look when I get home and if I do I'll get your info and send em :thumbsup:
 
I have a used mini 500K pot and another regular 500K but the shaft is too big for the volume knob. Is there a way to test the pots to make sure they are good before I go to the trouble of rewiring this guitar?
 
I think I have it fixed. I used one of the pots that I have here. Thanks guys!
 
Mark Day":2mvgmltk said:
Laura":2mvgmltk said:
steve_k":2mvgmltk said:
Laura":2mvgmltk said:
steve@russo":2mvgmltk said:
I suggest ordering a bourns pot from luxxtone, they are awesome
Wade at MCP told me great things about those. :confused:

I wish I would have ordered some pickups from Luxxtone last year. Made the mistake of going elsewhere for some BK's because the other guy supposedly would get them faster and it turned into a nightmare. I still feel like a douche for not ordering from Jerry because he was helpful (so was the other guy until he got my money...).

Somebody send Laura a 250K pot. If I was closer, I would do it myself. Got 12 Bourn's pots from Jerry to redo my LP's.

Oh Jerry.........


Steve
I thought I wanted a 500K pot... Why 250K? Now I am confused. :confused:

I'm using 500k's :)

Mark

Guess it depends on wood and pick up. On my Cantrell G&L's they come with 500's in them and a JB, I believe it was. It was so bright it was like glass breaking. I couldn't make a guitar change unless I ran back and made an adjustment to the amp. I put a 250K in it and squashed that bug.

Steve
 
Back
Top