BE100 W/D Setup Looper Questiion?

[Moshaholic]

Dave or anybody?

I have been running my BE100 with a wet dry setup and man does it sound killer.

Anyway moving away from using the FX loop to a wet dry setup seems to affected my looper pedal I was using to jam to.

Any suggestions on how to make a loopr work with a wet/dry setup as I'm thinking a looper won't work the same way it does running in the FX loop anymore with this type of setup? The looper does not seem to work/sound like it did before now.

Thanks

 

[RACKSYSTEMS]

What's the setup?

 

[Moshaholic]

What's the setup?

Hi Dave,

In the front I have a Wah > Maxon OD- > Whirlwind Phaser > ISP Decimator pedal > BE100

I have the slave out of the BE (level at about 2:00) > TC Ditto looper > TC Flashback Delay (mix set fully wet) > TC Corona Chorus (mix set fully wet) > into the bridge input of a Matrix 800GT > Bogner 8ohm rear loaded uber kab

The loop on the BE is turned off and the head is running totally dry into my Friedman cab

Before going wet/dry I had the same setup in the loop of the BE100 with the send going into the ditto through the delay then the chorus and then back into the return of the head...

Thank you for responding so quickly, I hope this info helps...

 

[RACKSYSTEMS]

Just put the dito in the loop.

 

[Greg Riley]

That's what I'm thinking. Ditto in the Loop.

 

[Greg Riley]

Hey Mosh, I'm about 45 minutes north of you.

 

[Moshaholic]

Hey Mosh, I'm about 45 minutes north of you.

Hey neighbor !!!

Are you coming to Nashville this week for Summer NAMM???

 

[Greg Riley]

Not sure, maybe Sunday. I got a outdoor Festival gig up here Saturday in Bowling Green. Me and Superunknown (Todd) are your Friedman neighbors.

Hey Mosh, I'm about 45 minutes north of you.

Hey neighbor !!!

Are you coming to Nashville this week for Summer NAMM???