BE100 with 2 cabinets

[Docster]

If I have two cabinets plugged into the back of my BE100, both 8-ohm cabinets, do I set the impedance at 8 or 4 at the amp?

 

[michael corpse]

4 ohm

 

[purpleplexi]

YUP^^^

 

[Adambomb]

How about a 16ohm 4x12 and an 8ohm 2x12 both Friedman cabs into the BE100? Possible at all?

 

[Chester Nimitz]

No ...

 

[Chester Nimitz]

No ...

 

[CrazyNutz]

How about a 16ohm 4x12 and an 8ohm 2x12 both Friedman cabs into the BE100? Possible at all?

Not ideally, but you'll be at ~6ohm load, slight mismatch so you should be able to run the amp at the 4ohm setting. The 8ohm cab would be soaking more power.

Rule of thumb, you can run a 8 - 16ohm load at 8ohm, and a 4 - 8ohm load at 4 ohm. But ideally you wan't to run it matched if possible of course