BMAN with lower volume

  • Thread starter Thread starter vinirosa
  • Start date Start date
vinirosa

vinirosa

Member
Hi guys, just checking if my BMAN is 100%. My BMAN's sound is great but the volume has to be almost on max in order to match the other modules (DD, VX and SL). Is that normal?

Thanks in advance,

Vinicius Rosa.
 
I found that I had to set the bman channel A volume to max, then set others to match.
 
I don't have this problem......I think you have an issue with your module. :confused:
 
General rule of thumb with clean modules is that you should get the clean set to your desired volume level, then adjust the other modules to match. The channel masters on my clean modules are always way higher than the channel masters on my drive modules. Example, on the Bman with channel A master at noon, gain at 10:00, my SL channel A master is somewhere between 9:00 and 10:00, IIRC, to get the same volume.
 
mboogman":376fgkhr said:
General rule of thumb with clean modules is that you should get the clean set to your desired volume level, then adjust the other modules to match. The channel masters on my clean modules are always way higher than the channel masters on my drive modules. Example, on the Bman with channel A master at noon, gain at 10:00, my SL channel A master is somewhere between 9:00 and 10:00, IIRC, to get the same volume.
Click to expand...

Thanks.
 
You must log in or register to reply here.
Back
Top