
aeroic
Active member
It is complete, and will be in my possession on Thursday. John @ StoneAge Cabinets did a great job on the headshell, and had to modify it a bit to fit the 100W transformers. But..here it is...and what it looks like.
Trace @ Voodoo Amps ended up modifying the wiring a bit to make it more correct to what a Silver Jubilee really was, and added a couple additional controls to it. The changes he did were:
Presence: Pushed in is stock, which has a bigger, looser bottom end and a bit warmer top end. Pulled out, tightens the bottom end up, and makes it a bit brighter. GIves you best of both worlds!!!
Bottom: Mainly to be used when the presence is pulled out (brighter mode). Adds a different tighter low end to the amp.
Trace installed the Mercury Magnetics power / output transformers and choke, and replaced the filter caps with higher end, better sounding filter caps.
I'll be using SED =C= EL34s...and chinese 12ax7a's in there.
I'm super stoked!!!!
Here are pictures:
Trace @ Voodoo Amps ended up modifying the wiring a bit to make it more correct to what a Silver Jubilee really was, and added a couple additional controls to it. The changes he did were:
Presence: Pushed in is stock, which has a bigger, looser bottom end and a bit warmer top end. Pulled out, tightens the bottom end up, and makes it a bit brighter. GIves you best of both worlds!!!
Bottom: Mainly to be used when the presence is pulled out (brighter mode). Adds a different tighter low end to the amp.
Trace installed the Mercury Magnetics power / output transformers and choke, and replaced the filter caps with higher end, better sounding filter caps.
I'll be using SED =C= EL34s...and chinese 12ax7a's in there.
I'm super stoked!!!!
Here are pictures:


