Ceriatone Yeti 50 with Kruse v5 mod?

[ledvedder]

I'm checking out these Ceriatone amps. I really want to get one, just not sure if I'd want the Yeti or the Chupacabra.

Here's a Yeti with some Kruse mod and a footswitchable clean channel,Ceriatone 50 Watt Modded Yeti w/V5 Voicing and 5 Way Low end switch w/clean channel https://applink.reverb.com/item/6472832 ... an-channel.

What do you guys think about this?

 

[rottingcorpse]

If I was seriously looking at the chupa,I would score that one.

 

[ledvedder]

If I was seriously looking at the chupa,I would score that one.

The Yeti or the Chupa?

 

[rottingcorpse]

The one in the reverb link.

 

[FourT6and2]

Either the Yeti or the Chupa will be great. Just different flavors. If you buy one and don't like it or are curious, you can easily mod the circuit into the other amp. It's a handful of parts.

 

[ledvedder]

Either the Yeti or the Chupa will be great. Just different flavors. If you buy one and don't like it or are curious, you can easily mod the circuit into the other amp. It's a handful of parts.

That's what I've read. I just pulled the trigger on a Chupa.

 

[FourT6and2]

Either the Yeti or the Chupa will be great. Just different flavors. If you buy one and don't like it or are curious, you can easily mod the circuit into the other amp. It's a handful of parts.

That's what I've read. I just pulled the trigger on a Chupa.

Nice.

 

[peterc52]

I thought the plate voltage was different from the two as well?

 

[FourT6and2]

I thought the plate voltage was different from the two as well?

All the voltages are different. Not just the plates. Different power transformers. But you can get by with changing the first dropping resistor value to raise or lower the preamp voltages.