mrmega
Active member
Hi!
I am developing a custom project I think the group would find interesting. I am willing to pay for someone to help with a custom circuit design (Paypal or Venmo) and I am also willing to share the knowledge learned and the circuit design here in the group too.
I need a diagram to give to my luthier.
I intend on using a 3 humbucker setup with the Fishman Fluence Modern 6 string active humbuckers in a Les Paul. This is what I would like to achieve. Is this doable?
1. Using a 5 way Les Paul style switch:
A. Bridge Pickup Only
B. Outer Coils of the Bridge and Neck Pickups
C. Bridge and Neck Pickups Together
D. Inner Coils of the Bridge and Neck Pickups
E. Neck Pickup Only
2. Volume/Tone Controls
A. Three volume pots - One for each pickup
B. One Tone Control (concentric potentiometer, one part for the Bridge pickup tone and the other for the Middle/Neck tone.
3. Volume Pot specifics:
A. Volume control for each pickup individually (Neck, Middle & Bridge pickups)
B. Push Pull Pots for each of the three volume controls that switch between "modern active" and "modern classic" mode for each pickup individually (Neck, Middle & Bridge pickups)
4. Three way mini toggle switch to control the middle pickup.
Position A. Causes the circuit to only allow the middle pickup to be used by itself.
Position B. No Middle pickup - 5 way switch determines the output.
Position C. Adds Middle pickup to whatever the 5-way switch is doing.
5. I would like to use the battery pack instead of a 9v battery unless there is a good reason to use a 9v
Thanks!
General Information about the pickups: MODERN HUMBUCKER CERAMIC VOICINGS:
Link to the pickups:
https://www.fishman.com/portfolio/fluence-modern-6-string-humbucker-pickups/
Wiring diagram links
1. Modern Humbucker Wiring Diagram: https://www.fishman.com/wp-content/uploads/2019/04/Fluence-Modern-HB-Set-Wiring-Diagram.pdf
2. Modern Humbucker Universal Wiring: https://www.fishman.com/wp-content/...Set-Wiring-Diagram-Universal-Battery-Pack.pdf
3. Modern Humbucker VOL/TONE Wiring: https://www.fishman.com/wp-content/...gram-Vol-Tone-with-Universal-Battery-Pack.pdf
4. Coil Tapping: https://www.fishman.com/wp-content/uploads/2019/04/Fluence_Humbucker_Coil_Tapping.pdf
5. Universal Fluence User Guide: https://www.fishman.com/wp-content/uploads/2019/04/Fluence-Universal-User-Guide.pdf
6. Battery Pack User Guide: https://www.fishman.com/wp-content/uploads/2019/04/Fluence-Battery-Pack-User-Guide.pdf
7. Les Paul Battery Pack PRO-BPK-LP1 https://www.fishman.com/portfolio/fluence-rechargeable-battery-pack-for-les-paul
I am developing a custom project I think the group would find interesting. I am willing to pay for someone to help with a custom circuit design (Paypal or Venmo) and I am also willing to share the knowledge learned and the circuit design here in the group too.
I need a diagram to give to my luthier.
I intend on using a 3 humbucker setup with the Fishman Fluence Modern 6 string active humbuckers in a Les Paul. This is what I would like to achieve. Is this doable?
1. Using a 5 way Les Paul style switch:
A. Bridge Pickup Only
B. Outer Coils of the Bridge and Neck Pickups
C. Bridge and Neck Pickups Together
D. Inner Coils of the Bridge and Neck Pickups
E. Neck Pickup Only
2. Volume/Tone Controls
A. Three volume pots - One for each pickup
B. One Tone Control (concentric potentiometer, one part for the Bridge pickup tone and the other for the Middle/Neck tone.
3. Volume Pot specifics:
A. Volume control for each pickup individually (Neck, Middle & Bridge pickups)
B. Push Pull Pots for each of the three volume controls that switch between "modern active" and "modern classic" mode for each pickup individually (Neck, Middle & Bridge pickups)
4. Three way mini toggle switch to control the middle pickup.
Position A. Causes the circuit to only allow the middle pickup to be used by itself.
Position B. No Middle pickup - 5 way switch determines the output.
Position C. Adds Middle pickup to whatever the 5-way switch is doing.
5. I would like to use the battery pack instead of a 9v battery unless there is a good reason to use a 9v
Thanks!
General Information about the pickups: MODERN HUMBUCKER CERAMIC VOICINGS:
- Voice 1 (Modern Active High Output
The ideal active ceramic humbucker tone. Crisp, searing crunch, tight bass with no mud, and a growl. - Voice 2 (Modern Passive Attack Organic, high output, passive ceramic tone. Superb distortion characteristics with Fluence dynamics and response.
Link to the pickups:
https://www.fishman.com/portfolio/fluence-modern-6-string-humbucker-pickups/
Wiring diagram links
1. Modern Humbucker Wiring Diagram: https://www.fishman.com/wp-content/uploads/2019/04/Fluence-Modern-HB-Set-Wiring-Diagram.pdf
2. Modern Humbucker Universal Wiring: https://www.fishman.com/wp-content/...Set-Wiring-Diagram-Universal-Battery-Pack.pdf
3. Modern Humbucker VOL/TONE Wiring: https://www.fishman.com/wp-content/...gram-Vol-Tone-with-Universal-Battery-Pack.pdf
4. Coil Tapping: https://www.fishman.com/wp-content/uploads/2019/04/Fluence_Humbucker_Coil_Tapping.pdf
5. Universal Fluence User Guide: https://www.fishman.com/wp-content/uploads/2019/04/Fluence-Universal-User-Guide.pdf
6. Battery Pack User Guide: https://www.fishman.com/wp-content/uploads/2019/04/Fluence-Battery-Pack-User-Guide.pdf
7. Les Paul Battery Pack PRO-BPK-LP1 https://www.fishman.com/portfolio/fluence-rechargeable-battery-pack-for-les-paul