Charvel1975
Active member
Hello all, hope you are doing well 
I've just started looking at configuring a not very large pedal board that will sit behind a Behringer Eurolive F1320D 300W 12 inch Active Floor Monitor at live shows and will be hooked up to a Boogie Mark V 90-Watt Head and Harley Benton 4X12 w/factory Celestion Vintage 30's.
I'd like to have everything on the pedal board as well. Wondering if this would house everything?
Rockboard Pedal Case EPC 02 Black
https://www.thomannmusic.com/rockboard_pedal_case_epc_02_black.htm
For Live shows, been using a custom flight case pedal board that has a DigiTech RP360XP Guitar Multi-Effects Pedal with a DigiTech FS3X 3-button Foot Switch for External control, Korg Pitchblack Pedal Tuner, Line 6 Relay G30 Wireless and 3 separate power supplies for all 3 units that all plug into a D'Addario Tour-Grade Power Base Power Strip then to a Furman SS-6B 6-outlet Surge Suppressor Strip where power cord from EVH 5150 III 6L6 V2 head with a Morley Hum Exterminator Ground Loop Hum Exterminator is plugged into that. The EVH footswitch won't fit in the pedal board and it's outside.
I attached some pics I took after our show last night.
Here are the dimensions what I've found online for everything that would be on the board:
DigiTech RP360XP only:
9.125" x 15.188" x 2.625"
DigiTech FS3X 3-button Foot Switch (Approximate
Product Dimensions: 7.25 x 2.25 x 4.81 inches
Mesa Mk V footswitch only:
Dimensions: 13 5/8 W x 5 5/8 D x 1 ½ H at the front and 1 7/8 H towards the back (the height difference due to an angled top) & 2 1/2" H with switches.
Korg Pitchblack Pedal Tuner dimensions:
Dimensions (W x H x D)
68 ✕120 ✕ 47 mm/ 2.68” × 4.72” ×1.85” (including feet)
Line 6 Relay RXS06 Wireless Receiver for Relay G30 Wireless Guitar System
Dimensions (WxHxD 4 3/8" x 2 1/8" x 1 1/4"
I've just started looking at configuring a not very large pedal board that will sit behind a Behringer Eurolive F1320D 300W 12 inch Active Floor Monitor at live shows and will be hooked up to a Boogie Mark V 90-Watt Head and Harley Benton 4X12 w/factory Celestion Vintage 30's.I'd like to have everything on the pedal board as well. Wondering if this would house everything?
Rockboard Pedal Case EPC 02 Black
https://www.thomannmusic.com/rockboard_pedal_case_epc_02_black.htm
For Live shows, been using a custom flight case pedal board that has a DigiTech RP360XP Guitar Multi-Effects Pedal with a DigiTech FS3X 3-button Foot Switch for External control, Korg Pitchblack Pedal Tuner, Line 6 Relay G30 Wireless and 3 separate power supplies for all 3 units that all plug into a D'Addario Tour-Grade Power Base Power Strip then to a Furman SS-6B 6-outlet Surge Suppressor Strip where power cord from EVH 5150 III 6L6 V2 head with a Morley Hum Exterminator Ground Loop Hum Exterminator is plugged into that. The EVH footswitch won't fit in the pedal board and it's outside.
I attached some pics I took after our show last night.
Here are the dimensions what I've found online for everything that would be on the board:
DigiTech RP360XP only:
9.125" x 15.188" x 2.625"
DigiTech FS3X 3-button Foot Switch (Approximate
Product Dimensions: 7.25 x 2.25 x 4.81 inches
Mesa Mk V footswitch only:
Dimensions: 13 5/8 W x 5 5/8 D x 1 ½ H at the front and 1 7/8 H towards the back (the height difference due to an angled top) & 2 1/2" H with switches.
Korg Pitchblack Pedal Tuner dimensions:
Dimensions (W x H x D)
68 ✕120 ✕ 47 mm/ 2.68” × 4.72” ×1.85” (including feet)
Line 6 Relay RXS06 Wireless Receiver for Relay G30 Wireless Guitar System
Dimensions (WxHxD 4 3/8" x 2 1/8" x 1 1/4"
