DCM150 questions...

[ttosh]

Guitar > Wireless > Wah > ISP Ch1 > JSX Input

JSX FX Send > ISP CH.2 > JSX FX Return > Middle Dry speakers

JSX Line Out > G> Sys Input > Loop 1 - Blues Driver > L/R Output to DCM150 > L/R Wet Cabs

To be clear the FX Send is going to the in of the ISP and the FX Return is the return from the ISP and the Cabinet out on the head goes to middle dry speakers.

The line out part above is accurate. I just wanted to make sure you are not going from the FX return to the middle speakers. I am sure I just misread that, but wanted to double check.

You will find this to sound massive

 

[The_Kid]

To be clear the FX Send is going to the in of the ISP and the FX Return is the return from the ISP and the Cabinet out on the head goes to middle dry speakers.

yeah i should have been more clear.

JSX FX Send > ISP CH 2. in/out > JSX Return > Speaker out to Dry speakers


Would Ch 2 of the ISP be better suited somewhere in the G-Sys chain...say in Loop 5 just before going to those power amps? or is there more potential noise in the JSX Dry chain?

 

[ttosh]

To be clear the FX Send is going to the in of the ISP and the FX Return is the return from the ISP and the Cabinet out on the head goes to middle dry speakers.

yeah i should have been more clear.

JSX FX Send > ISP CH 2. in/out > JSX Return > Speaker out to Dry speakers


Would Ch 2 of the ISP be better suited somewhere in the G-Sys chain...say in Loop 5 just before going to those power amps? or is there more potential noise in the JSX Dry chain?

I think in the JSX chain would be best, but sometimes anything in an amps loop will alter the dry tone. Anyway this is something for you to experiment with as each setup probably differs regarding this.

 

[The_Kid]

yeah I suppose....

THanks for all your help man. I appreciate it. I'm getting the 12 space rack today, and hopefully the stereo power amp will be here by the weekend...I/m trying to pay extra for the overnight or two day....

 

[The_Kid]

in the W/D/W scenario im now involved in....



Where would be the best place to run my talkbox?

before the 'dry' speakers? this would still allow the signal to hit the wet cabs thus diminishing the talkbox effect.

I can setup a patch that mutes the left/right ouputs to the wet speakers, but that involves two steps and could get cumbersome depending on the song and part being played.

Just looking for the easiest method to incorporate this.