Diezel Herbert and W/D System

[ttosh]

Reviewing the information in the manual there is not a line out for the Herbert. Is an ISO box from Suhr going to be the best option for this?

 

[geetar_geek79]

you can use your parallel efx loop send like a line out if you're not using it for anything. i imagine it should be free of efx since you're wanting to do a wet/dry setup.

 

[moltenmetalburn]

I do this with my Einstein.

 

[ttosh]

Is the Send of the loop after the pre section? I have always ran my Wet with a line out after the power section. I wonder how this would sound doing it this way? I will have to give it a shot and see what comes out

 

[moltenmetalburn]

Is the Send of the loop after the pre section? I have always ran my Wet with a line out after the power section. I wonder how this would sound doing it this way? I will have to give it a shot and see what comes out

correct after the preamp.

i should have mentioned Im using a tube power amp not a SS full range so it works well for me, not identical tones but that was whats I wanted, using different output tubes for each.

if doing the SS thing the suhr iso is your best bet for the post power amp signal.

 

[MARK2C]

How about the compensated out ?

 

[moltenmetalburn]

How about the compensated out ?

Includes speaker simulation.

I didnt do it this way because I didn't want to double up on the speaker EQ curve.