DIY? default channel A ->B of Egnater module in a Randall?

[GtrGear]

A dual Egnater module in a Randall only channel A of the module will be active.
Egnater tells that it is possible to make channel B the default channel of the Egnater dual module.
But how?

 

[Jeff Hilligan]

Resistor swap on the vertical board for some modules and more work on others. I would need to know which modules you woiuld be doing the swap to?

 

[RockStarNick]

Will doing this affect operation in a Mod50?

If used with a non-modded module in slot A, would it go 1, 2, 4, 3?

 

[Jeff Hilligan]

The Randall sees three channels. If you mod the Egnater you are just making the higher gain be on channel A. So they will be reversed if you use them in a Eggy. A will be higher gain and B will be lower. In the Randall it just sees one channel.

 

[GtrGear]

I would need to know which modules you woiuld be doing the swap to?

SL2
EG5
T/D

 

[Jeff Hilligan]

T/D is not gonna happen. Sl2 and EG5 are simple resistor swaps. I will consult with Bruce an see if we can give this stuff out for customers to do!

 

[GtrGear]

It would be a boost for Egnater sales is you give the mod for free!
Most of the Randall equivalent modules sound way less than Egnater so you will sell more Egnater modules
to Randall owners. Especially in Europe where we can't buy the REAL Egnater anymore...
(if you do continue in the future please call Jeff )