Ecstasy footswitch issue...

orangekick

Member
Anyone have an issue with the footswitch on their ecstasy not switching channels? I have been having trouble getting channel three to engage every time. I was wondering if it might just be dirty contacts or a bad switch.
 

orangekick

Member
So... I put some contact cleaner on the offending switch, pushed it in and out a few times and it seems to be actually sticking. It would appear that I may need a new switch. Can anyone point me to the easiest way to replace this?
 

* velcro-fly *

Well-known member
orangekick":2zu1ujkm said:
Anyone have an issue with the footswitch on their ecstasy not switching channels? I have been having trouble getting channel three to engage every time. I was wondering if it might just be dirty contacts or a bad switch.


It may be an issue with the LED for channel three as believe it or not the LED acts as a resistor in the circuit. Call Jorge at Bogner and ask him, he'll likely tell you the same thing. Easy replacement too BTW.

If the amp will switch manually on the back, the LED is more than likely the culprit
 
Top