Einstein bias help

[Anonymous]

Hi guys,

I just got my first Diezel today. First thing I checked was the bias, but I'm having trouble.
I do the right procedure, and can get a reading when setting my multimeter at 200 V, oddly, but I'm getting a "1" reading when I set it at 200 mA.
I tried a second multimeter, but it didn't work either. Amp was in the "run" position, fuse was taken out.
There must be something I'm doing wrong here...

Thanks in advance

 

[Anonymous]

Oh... it must not help that the clean channel is dead

Turns out it was a bad preamp tube (cracked).
V5 Return Driver position!
So to anybody having issues with your amp, be sure to check all your preamp tubes first!

 

[King Crimson]

DMM
A=== section
Red probe - mA
Black probe - COMM
A=200m
Pull whatever fuse you want to bias a set. And you should be good.

 

[Anonymous]

Thanks,

Methodology wasn't the problem.
Turns out I had one multimeter that couldn't read current and the other one was broken.