Einstein parallel loop with TIMEFACTOR

  • Thread starter Thread starter raginghonkies
  • Start date Start date
R

raginghonkies

New member
hello ,

Can anyone help me out ? i would like to use the eventide timefactor in the parallel Loop of my Einstein 100W ...

What's the Setup ? I understand i must engage the killdry function on the timefactor pedal , but after ? where do i set the Knob of the parallel knob ? Full clockwise ? Half way ? And then what about the mix knob on the timefactor ?

PLEASE HELP ;-)
 
Well, the right way of doing it is having your FX's mix all the way up & then getting the FX level you desire with the mix knob on the Einstein. I never do anything right, so I setup the amps loop level to 100% & then set the level on eventide to wherever I want it to be. The short answer is it doesn't really matter as long as you have your killdry on, just get the delay to desired level using any of the knobs & you are good to go.
 
nbarts":1gnkvjof said:
Well, the right way of doing it is having your FX's mix all the way up & then getting the FX level you desire with the mix knob on the Einstein. I never do anything right, so I setup the amps loop level to 100% & then set the level on eventide to wherever I want it to be. The short answer is it doesn't really matter as long as you have your killdry on, just get the delay to desired level using any of the knobs & you are good to go.
Click to expand...

Thanks for the fast answer :-) That's what i was thinking about ... Having the Killdry function on , then FX level of the parallel loop at 100 % , and then setting every preset / Sound of the timefactor with the level of the eventide.That would be cool , because i don't want just one static setting for all my presets ... would this be a correct setup ?
 
^That'll be fine, depending on what you want to get. Experimenting will get you there.
I will have to check how did I set mine, because I have the exactly same combo ;) I tend to live quite well with set it and forget it approach, esp. with the "forget it" part of it :)
I definitely used the "Kill dry", but shall check the effects level pot position.
 
Ok , Please let me know then , how did you setup yours :-) Very curious about that and want to do the things correctly ... Did you also try to use it in the Serie Loop ? Nice improvement using the timefactor in the Parallel loop ?
 
Sorry for the delay, but was too busy these days :) The parallel effects volume here is at around noon to 1:00. So it is not at 100%. Sounds great to me. YMMV
Niki
 
You must log in or register to reply here.
Back
Top