Fender Twin kemper klip

[stratotone]

Since 99% of modelling clips are crazy distorted amps... here's a profile I took of my '70s master volume twin cranked pretty dang loud last night. Used a ribbon and a audix i5 mic blended together - the ribbon added some air and some depth, the audix gave it a little punch. Guitar I used for this was an EJ signature strat.

All fx/etc are off the kemper and in mono, no post recording chicanery or such. This is right off the kemper.

I goofed around for awhile, then cut out a few parts I liked, ergo the edits here and there. I think there are at least 3, possibly four different pickup positions here. Used the same profile, so all tonal variations are guitar pickups. Didn't change volume or tone controls.

https://soundcloud.com/okstrat/fender-twin-profile

 

[Shiny_Surface]

Sounds great, although I have to admit I'm a bit biased towards the playing itself not that the tone was bad or anything.

 

[stratotone]

Sounds great, although I have to admit I'm a bit biased towards the playing itself not that the tone was bad or anything.

Thanks man! Just goofing around with weird chords. If I made a mistake I'd just repeat it three times and then it's jazz

 

[Sick Michael]

Sounds really good and your playing is grand!

Desperately trying to use the line 6 Twin model as a reference point, just listening to this..... your tone is noticeably better (of course...).

 

[biaxident82]

Very cool. Will you be putting this profile on your webpage?

Your profiles are always top notch

 

[BYTOR]

Sounds great, although I have to admit I'm a bit biased towards the playing itself not that the tone was bad or anything.

Thanks man! Just goofing around with weird chords. If I made a mistake I'd just repeat it three times and then it's jazz

Sounds good!!

What's the best profile you have to do the classic VH thing? The Kemper doesn't have a plate verb so how good does the room verb sound??

When you do your recordings do you just use the verb from your DAW?