jd267
New member
Do any of you guys have any pics or diagrams showing what needs to be done to the lead tone stack to achieve the dragon lead chan on my cobra? Thanks fellas looking forward to hearing from you dudes thanks!
chunktone
Active member
Both schematics are online at the Framus site. Should be pretty easy to track down the differences.
jd267
New member
Kind of suck at reading schematics lol was hoping some one would post up some pics to help me out . Or maybe a diagram. Pretty sure it's only a few resistors
O
O'Rourke
Member
Do you have a V5 with the external bias points?
jd267
New member
O'Rourke":3fzfgw7a said:
Yes I do. Kind of on the fence about modding the amp . May just pick up a dragon soon.
O
O'Rourke
Member
The circuit differences are minor, my old Dragon I modded to Cobra-ish specs said "Cobra V5" on the main PCB. Pretty easy to turn one into the other except for the clean channel I never really looked into that.
The PCB's are pretty bad though be careful soldering/desoldering on those.
The PCB's are pretty bad though be careful soldering/desoldering on those.
moltenmetalburn
Active member
I did this to my dragon, made the crunch channel the cobra lead. Was awesome!
Did you even google?
http://www.harmonycentral.com/forum/for ... 8/1536747-
Did you even google?
http://www.harmonycentral.com/forum/for ... 8/1536747-
jd267
New member
moltenmetalburn":1q0cv2wt said:
Yes I did that thread is from 2006 and the pics are erased
if you acutely went threw it you would have seen that.
moltenmetalburn
Active member
jd267":3rfz8alj said:moltenmetalburn":3rfz8alj said:
Yes I did that thread is from 2006 and the pics are erased
There were no pics when I used this to mod mine. And I did to through the thread. I'll only teach you to fish not fish for you.
All you need are the mod values and a schematic.
jd267
New member
moltenmetalburn":246wqpib said:jd267":246wqpib said:moltenmetalburn":246wqpib said:
Yes I did that thread is from 2006 and the pics are erased
There were no pics when I used this to mod mine. And I did to through the thread. I'll only teach you to fish not fish for you.
All you need are the mod values and a schematic.
I figured it out. The mods are in the lead eq of both amps. Decided to leave it stock and just pick up another dragon.