Fried ot?

  • Thread starter Thread starter JackBootedThug
  • Start date Start date
Hang on, Lets look at this...

Have you fixed the offending Marshall Cab Jack?

Did it actually Short, or did a wire break and was it and an Open circuit?

From an Electrical standpoint, a 0.1 Ohm short is a lot closer to 4/8/16 Ohms compared to an Open Circuit, and is less likely to let the magic smoke out of the Output Tranny.


I agree with @Dan Gleesak : pull all the preamp tubes from the PI forward and see which one, if any, is a guilty bastard. Starting with the Phase Invertor and working your way to the V1
 
Yes I fixed the jack. I didn’t solder the connectors but I did squeeze them with needle noses… hard to get them back on the input jack so should be fine.
 
I just assumed that it fried the ot because the connectors were barely touching so I assumed it was a no load situation. I was playing and the volume dropped and hiss 🐍
 
I just assumed that it fried the ot because the connectors were barely touching so I assumed it was a no load situation. I was playing and the volume dropped and hiss 🐍

If you Ohm out the OT.... just Ohm Meter on the speaker jack of the amp... what do you get?

if it is Hissing, that sound is coming from somewhere, through that OT to the speaker
 
Hang on, Lets look at this...

Have you fixed the offending Marshall Cab Jack?

Did it actually Short, or did a wire break and was it and an Open circuit?

From an Electrical standpoint, a 0.1 Ohm short is a lot closer to 4/8/16 Ohms compared to an Open Circuit, and is less likely to let the magic smoke out of the Output Tranny.


I agree with @Dan Gleesak : pull all the preamp tubes from the PI forward and see which one, if any, is a guilty bastard. Starting with the Phase Invertor and working your way to the V1
Set it up and the green channel was fine. Weird. Crunch mode was good. Just for the hell of it I flipped it over to the red channel. It’s working. wtf 🤬? Don’t get me wrong I’m happy but like I said….wtf?
 
Did you pull and re-seat the tubes?

You may have just had a corroded/Dirty Pin of socket making you rethink your life choices....

Either way, don't be surprised if the issue returns, but until then, you know what time it is...


NEO SOUL Time!
 
Set it up and the green channel was fine. Weird. Crunch mode was good. Just for the hell of it I flipped it over to the red channel. It’s working. wtf 🤬? Don’t get me wrong I’m happy but like I said….wtf?
Good deal! Definitely grab some Deoxit or contact cleaner and spray the tube sockets, and put a tube in/out a few times in each tube slot as ^^ stated above. If you have good power/sound now, that rules out a catastrophic failure of the OT. Something small and fixable!
 
Good deal! Definitely grab some Deoxit or contact cleaner and spray the tube sockets, and put a tube in/out a few times in each tube slot as ^^ stated above. If you have good power/sound now, that rules out a catastrophic failure of the OT. Something small and fixable!
That’s the only thing I did not do… clean the tube sockets….
 
The combo takes up so much room I might mock something up… a cradle to seat the chassis in…. My last head conversion while fine was uglier than sin. Then I got in an argument with some douche on facebook who offered retolexing. Because it was a pv ultra plus I said I wanted red white and blue and then I was gonna stencil MAGA on the grill cloth. Get it? Ultra MAGA… fuckin prick had a meltdown on me. Lol. Called me racist and a Nazi…lol. I offered him satisfaction by coming to see him but he was not interested after all. Ask me how his business is going? I mean damn… I was doing it as a joke. That was when the media was saying the ultra MAGA stuff on tv if anyone remembers. Get it? Pv ultra MAGA? I thought it was funny anyway. He really got worked up when I asked him if he sat down to piss…. Anyway…I thought it was funny…
 
The combo takes up so much room I might mock something up… a cradle to seat the chassis in…. My last head conversion while fine was uglier than sin. Then I got in an argument with some douche on facebook who offered retolexing. Because it was a pv ultra plus I said I wanted red white and blue and then I was gonna stencil MAGA on the grill cloth. Get it? Ultra MAGA… fuckin prick had a meltdown on me. Lol. Called me racist and a Nazi…lol. I offered him satisfaction by coming to see him but he was not interested after all. Ask me how his business is going? I mean damn… I was doing it as a joke. That was when the media was saying the ultra MAGA stuff on tv if anyone remembers. Get it? Pv ultra MAGA? I thought it was funny anyway. He really got worked up when I asked him if he sat down to piss…. Anyway…I thought it was funny…
Your shit is ALWAYS funny !!!!
 
Back
Top