Friedman Pedalboard & Power Supply

[Junk Yard Dog]

Anyone have these?

 

[errrrrl]

I have the power supplies, not the board. Silent.

 

[Junk Yard Dog]

I have the power supplies, not the board. Silent.

Well, I just splurged and went with 1525 board, buffer, and power supply. I don't even know how I would connect or use that buffer, but will have someone locally set it up for me.

Thanks for the 'feedback'. Ha! ...I"m a dork.

Any other users?

 

[errrrrl]

I have the power supplies, not the board. Silent.

Well, I just splurged and went with 1525 board, buffer, and power supply. I don't even know how I would connect or use that buffer, but will have someone locally set it up for me.

Thanks for the 'feedback'. Ha! ...I"m a dork.

Any other users?

Ah you didn't mention the buffer, I do have that too

I can tell you how I have mine setup. I have half my board to run in front of the amp and the other half in the loop.

From the front (the side with the buffer button) I have that facing outward.
Buff In is where I plug my guitar into
Thru 1 goes to my amp input jack
Thru 2 goes to my amp' fx send
Thru 3 goes to my amp's fx return

From the back (the side with the 9v power jack)
Buff Out goes to my Wah/overdrives (front of my amp)and then into Thru 1
Thu 2 goes to my mobious/delay (loop pedals) and then into Thru 3

It can get confusing especially if you run things in front and in the loop, the only reason I was able to help was because I found my chicken scratch diagram I made after some intense thinking and a few cups of coffee Best of luck dude!

 

[atrox]

I love mine. Very quiet and the buffer bay rules.

The key to routing it all to the bay, is just doing one thing at a time. I run 4CM into mine, so i wired up my in-front cables first, Then send, then return. Unless you have different color cable for each thing, then just having a bunch of black cables dangling down can be a nightmare.

 

[SFW]

I've been eyeballing their big board. I really want one, but I have to save the money first...lol!