King Guitar
Banned
New member
Hey Guys,
I am getting ready to commission a new board from Rooster at Trailer Trash.
http://www.trailertrashpedalboards.com
The last one I built (Pictures below) was cool but too huge for what I needed. I have sent her off on tour with a new owner and want to come up with a awesome and fairly compact TT Board.
It has to be versatile as it will do double duty in front of a few different amps depending on the situation I find myself in:
Diezel VH-4
Diezel Herbert
Mesa Road King II
Fender Vibroverb Diaz
I want to run the 4 cable method with the reverb and the delays in the loop and the rest in front.
This is what I was thinking for a do it all clean board.
PEDALBOARD: Black Trailer Trash Pro Series Hardtop Board with Neutrick jacks (Maybe the Glow Top for the cool factor)
WAH: Fulltone Clyde Deluxe
VIBE: Fulltone Deja Vibe 2
OVERDRIVE: Fulltone OCD V.4
DELAYS: Eventide Eventide Timefactor
MODULATIONS: Eventide Modfactor
REVERB: Dr. Scientist Red Radical Reverberator
NOISE: ISP Pedal Decimator
TUNER: Boss TU2
POWER: PP2
WIRELESS: ???
I am hoping I can get all of this onto a 18x16 but I think it might not fit and I will need to bump up to a 28x16 board.
Here is my old TT Board:
Here is where I need your help. I am open to any suggestions on a pedal that might be awesome and I just don't know about it. Maybe you guys have a better idea than running the delays and verb in the loop. Post up what you would put in these slots if you were building the same board. I look forward to the replies. This can be fun and when done I will post up the finished product after it is built by Rooster.
YOUR SUGGESTIONS:
PEDALBOARD:
WAH:
VIBE:
OVERDRIVE:
DELAYS:
MODULATIONS:
REVERB:
NOISE:
TUNER:
POWER:
WIRELESS:
I am getting ready to commission a new board from Rooster at Trailer Trash.
http://www.trailertrashpedalboards.com
The last one I built (Pictures below) was cool but too huge for what I needed. I have sent her off on tour with a new owner and want to come up with a awesome and fairly compact TT Board.
It has to be versatile as it will do double duty in front of a few different amps depending on the situation I find myself in:
Diezel VH-4
Diezel Herbert
Mesa Road King II
Fender Vibroverb Diaz
I want to run the 4 cable method with the reverb and the delays in the loop and the rest in front.
This is what I was thinking for a do it all clean board.
PEDALBOARD: Black Trailer Trash Pro Series Hardtop Board with Neutrick jacks (Maybe the Glow Top for the cool factor)
WAH: Fulltone Clyde Deluxe
VIBE: Fulltone Deja Vibe 2
OVERDRIVE: Fulltone OCD V.4
DELAYS: Eventide Eventide Timefactor
MODULATIONS: Eventide Modfactor
REVERB: Dr. Scientist Red Radical Reverberator
NOISE: ISP Pedal Decimator
TUNER: Boss TU2
POWER: PP2
WIRELESS: ???
I am hoping I can get all of this onto a 18x16 but I think it might not fit and I will need to bump up to a 28x16 board.
Here is my old TT Board:
Here is where I need your help. I am open to any suggestions on a pedal that might be awesome and I just don't know about it. Maybe you guys have a better idea than running the delays and verb in the loop. Post up what you would put in these slots if you were building the same board. I look forward to the replies. This can be fun and when done I will post up the finished product after it is built by Rooster.
YOUR SUGGESTIONS:
PEDALBOARD:
WAH:
VIBE:
OVERDRIVE:
DELAYS:
MODULATIONS:
REVERB:
NOISE:
TUNER:
POWER:
WIRELESS:
