Help Please! Bare Knuckle Aftermath installation question?

[Moshaholic]

Hi,

This is my first BKP, I have the a black aftermath bridge 53mm im suppting in a charvel/strat style guitar.

Question... The pickup has no "Screw" side on the coils as all everything on both coils are allen keys...

I want to make sure I put this thing in the right direction and heck if you can tell from the wiring guide that came with the pickup or the wring guide on the website wiring guide.

I'm guessing it should be placed in the guitar with the the back corner of the pickup with the wire coming out pointing down closest to the control cavity and bridge of the guitar like as a lets say Duncan JB would be right?

If this thing has screws on just one side this would be a no brainier as screw side would just go next to the bridge.

Thanks...

 

[FourT6and2]

I would guess that if it's a bridge pickup, install it so the lead comes out the bottom. If it's a neck pickup, flip it around so the lead comes out the top. Just basing this on how pickups are normally installed in something like a Gibson Les Paul. Every BKP I've received has been like this. But I would email BKP and ask Tim.

 

[Moshaholic]

I would guess that if it's a bridge pickup, install it so the lead comes out the bottom. If it's a neck pickup, flip it around so the lead comes out the top. Just basing this on how pickups are normally installed in something like a Gibson Les Paul. Every BKP I've received has been like this. But I would email BKP and ask Tim.

That's pretty much what I'm thinking I just want to get it right the first time. Lol

 

[Moshaholic]

I just went with doing the way I usually have in the past AND IT ROCKS !!!

Killer pick up!!!

WOOT !!!

 

[FourT6and2]